HKS Super Mega Flow help!!!!
#1
Rotaryizms93
Thread Starter
Join Date: Feb 2006
Location: Long Beach
Posts: 121
Likes: 0
Received 0 Likes
on
0 Posts
HKS Super Mega Flow help!!!!
so, i bought a HKS super mega flow... and it came with everything.. things they forgot were the instructions... i dont know where the hoses with the blow-off valves go... or where to put the hose right behing the air pump, or right under the blow off valves... does anyone know where i can get a good write-up or can anyone tell me where the hoses that used to go to the stock intake ar box???
#2
Mr. Links
iTrader: (1)
http://mahjik.homestead.com/files/FD...3/MVC-002F.JPG
http://mahjik.homestead.com/files/FD...3/MVC-005F.JPG
http://mahjik.homestead.com/files/FD...3/MVC-006F.JPG
http://mahjik.homestead.com/files/FD...3/MVC-008F.JPG
Some old pics, but you'll get the idea.
You have 3 connections and 4 lines. You'll have to decide which once you aren't reconnecting.
1. Airpump inlet
2. Airpump relief line
3. BOV
4. CRV
In my pics, I had an aftermarket BOV, so that area was plugged. I connected the CRV and the airpump inlet into the intake. The airpump relief line was capped with a rubber stopper and 4 holes drilled into it to allow access air out.
http://mahjik.homestead.com/files/FD...3/MVC-005F.JPG
http://mahjik.homestead.com/files/FD...3/MVC-006F.JPG
http://mahjik.homestead.com/files/FD...3/MVC-008F.JPG
Some old pics, but you'll get the idea.
You have 3 connections and 4 lines. You'll have to decide which once you aren't reconnecting.
1. Airpump inlet
2. Airpump relief line
3. BOV
4. CRV
In my pics, I had an aftermarket BOV, so that area was plugged. I connected the CRV and the airpump inlet into the intake. The airpump relief line was capped with a rubber stopper and 4 holes drilled into it to allow access air out.
#4
RX-7 Bad Ass
iTrader: (55)
Call HKS up. They're VERY helpful on the phone, and will happily fax you the instructions.
Dale
Dale
#5
Rotaryizms93
Thread Starter
Join Date: Feb 2006
Location: Long Beach
Posts: 121
Likes: 0
Received 0 Likes
on
0 Posts
i think mine looks different than mahjik's setup, it looks like the old version, with the smaller filters... thanks a bunch guys... is there a previous version???
#6
Rotaryizms93
Thread Starter
Join Date: Feb 2006
Location: Long Beach
Posts: 121
Likes: 0
Received 0 Likes
on
0 Posts
i think its the HKS Super Flow... almost like these
http://cgi.ebay.com/ebaymotors/HKS-S...QQcmdZViewItem
http://cgi.ebay.com/ebaymotors/HKS-S...QQcmdZViewItem
Last edited by shazzam00; 06-19-06 at 01:29 PM.
#7
Mr. Links
iTrader: (1)
In that case, you are only missing one extra connections. Honestly, it doesn't matter which ones you connect up. The only one you need to do anything special with is the airpump inlet. If you don't have that one connected to the intake, you'll want to use a small lawnmower filter on it.
Trending Topics
#8
Rotaryizms93
Thread Starter
Join Date: Feb 2006
Location: Long Beach
Posts: 121
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Mahjik
In that case, you are only missing one extra connections. Honestly, it doesn't matter which ones you connect up. The only one you need to do anything special with is the airpump inlet. If you don't have that one connected to the intake, you'll want to use a small lawnmower filter on it.