3rd Generation Specific (1993-2002) 1993-2002 Discussion including performance modifications and Technical Support Sections.
Sponsored by:

White Smoke at startup help!!!

Thread Tools
 
Search this Thread
 
Old 10-09-01, 06:54 PM
  #1  
Full Member

Thread Starter
 
migamb's Avatar
 
Join Date: Aug 2001
Location: Austin, TX
Posts: 50
Likes: 0
Received 0 Likes on 0 Posts
Question White Smoke at startup help!!!

My car is smoking heavily after cold startup. Here is the story, yesterday I was putting my HKS catback and I decided to also take out the extension manifold to fix the screeching sound from the ACV. While removing the ACV it broke in half. I was able to JB wled it and let it cured and I was able to put it back on and I put some sealant on the disk to stop the screeching as per someones advice. I also went ahead and removed the AWS and allof its components. I used blockoff plates and used the resistor. I also removed the double throttle actuator and plates as well as remove the coolant lines from the TB as per robinettte's site. I also installed the HKS cat back. I am using Royal Purple motor oil but have used it for two weeks and had no smoking. This all started after installing the HKS exhaust. It is not a prestone or water smell it is a definite exhaust smell. Any ideas?
Old 10-10-01, 02:04 AM
  #2  
Full Member

Thread Starter
 
migamb's Avatar
 
Join Date: Aug 2001
Location: Austin, TX
Posts: 50
Likes: 0
Received 0 Likes on 0 Posts
I believe it is oil. Would removing the PVC vavle have anything to do with it? I still have the secondary route to the turbo with a catch can.
Old 10-10-01, 11:24 AM
  #3  
Senior Member

 
Join Date: Mar 2001
Location: Eagle Rock, Ca
Posts: 260
Likes: 0
Received 0 Likes on 0 Posts
Thats just condensation in the cat back. The same thing happened when I put my main cat which has been lying in garage for about a year. Alot of white smoke on startup. Just the other day, I put my stock muffler back on after its been lying around for a year too. Same thing happened. Alot of white smoke, but doesn't smell like coolant. JUst smells dirty (like burning dust or something).
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
antman0408
2nd Generation Specific (1986-1992)
4
10-05-15 04:33 PM
SpaceCadet_Alt3
Introduce yourself
1
10-01-15 11:35 PM
frosty1993
General Rotary Tech Support
3
09-30-15 01:27 PM
dexter snoek
New Member RX-7 Technical
4
09-29-15 09:18 AM



Quick Reply: White Smoke at startup help!!!



All times are GMT -5. The time now is 04:30 AM.