You dont need a funnel just pour it into the gas filler. It seeps past the spring loaded blockoff plate. I pour it in then pump my gas, no funnel and no mess. Not hard at all.

 

what i use for premixing is a bodybuilding cup i put about 32oz of oil in it then when its time to fill i put 8oz in it also has gradations on the side. i also have another question today my car has been flooding alot i didnt drive all week and went to the store to get some grocerys well when i get out of the store and go start the car and it seemed to be flooded bad so i cranked it a few more times and it started and idled fine. first off i thought i had coolant in the chamber but the filler neck is full and had no smoke whatsoever on start up. The car idled fine and pulled hard so i thought it had to be a leaky injector! does anyone know anyway to test if theyre leaking besides flooding?

 

I have skipped around reading the post but didn't you say you had 85k on the engine? Mine did this exact same thing and i ended up just having low compression from worn side seals and housings. Regardless with 85k you have to start thinking rebuild soon.