3rd Generation Specific (1993-2002) 1993-2002 Discussion including performance modifications and Technical Support Sections.
Sponsored by:

whats this noise???

Thread Tools
 
Search this Thread
 
Old 02-11-04 | 10:37 PM
  #1  
rotorbrain's Avatar
Thread Starter
fart on a friends head!!!
 
Joined: Mar 2002
Posts: 4,104
Likes: 1
From: sheppard AFB, TX
whats this noise???

hey guys, my car is making this turkey gobble kinda noise at the turbo area when i let off the throttle after ive been boosting around 5 + psi. i dont know what it is. . . anybody have any insight? do i need to go ALL the way out on my BOV? is this compressor surge?

also, take this into consideration. . . my wastegate is vented to the atmospherel. . . could my wastegate be stupid?

thanks,
paul
Old 02-11-04 | 11:11 PM
  #2  
Rotary Freak
 
Joined: Mar 2003
Posts: 2,274
Likes: 0
From: GLENDALE, CA
your bov might be blocked and its making that type of a noise when you let off the gas. i had this happen to mine before because the mechanic had put a block off thing after the bov not before it. this might be it
Old 02-11-04 | 11:15 PM
  #3  
I AM A THIEF - READ GOOD GUY / BAD GUY

 
Joined: Sep 2003
Posts: 217
Likes: 0
From: Chattanooga, TN
check the vacuum line to your BOV, if it is silicon it might be collapsing under heat and not letting the BOV function properly. I had this problem a couple weeks ago, and a beefed up vacuum line solved it.

-Sean
Old 02-11-04 | 11:42 PM
  #4  
rotorbrain's Avatar
Thread Starter
fart on a friends head!!!
 
Joined: Mar 2002
Posts: 4,104
Likes: 1
From: sheppard AFB, TX
the problem is that i can hear the bov vent and then at the end the chirping occurs. . .

thanks for the input guys. . . your thinking the same as me. . . BOV!!!!! hahahaha

paul
Old 02-12-04 | 12:31 AM
  #5  
Toadman's Avatar
Nomad Mod
 
Joined: Feb 2001
Posts: 359
Likes: 5
From: The O.C.
Listen to the sound of my BOV*gobble*, my BOV*gobble*, my BOV!
Old 02-12-04 | 07:48 PM
  #6  
rotorbrain's Avatar
Thread Starter
fart on a friends head!!!
 
Joined: Mar 2002
Posts: 4,104
Likes: 1
From: sheppard AFB, TX
thanks, toadman. . . just dont come hunting for my car around thanksgiving. . . alright!!!! hahahaha

paul
Old 02-12-04 | 08:10 PM
  #7  
FourtyOunce's Avatar
Rotary Freak
iTrader: (15)
 
Joined: Feb 2001
Posts: 2,007
Likes: 175
From: Old Bridge, NJ
do you still have the stock airpump ?
Old 02-12-04 | 09:21 PM
  #8  
rotorbrain's Avatar
Thread Starter
fart on a friends head!!!
 
Joined: Mar 2002
Posts: 4,104
Likes: 1
From: sheppard AFB, TX
no my car is FAAAAAAAAAAAAR from stock. heres my setup. . . xs to4e, hks racing wastegate, apexi twinchamber bov, yada, yada, yada. . . i guess i wont know what it is till i get it on the dyno and can take a closer look at it all while under a load.

paul
Old 02-12-04 | 09:59 PM
  #9  
rotorbrain's Avatar
Thread Starter
fart on a friends head!!!
 
Joined: Mar 2002
Posts: 4,104
Likes: 1
From: sheppard AFB, TX
i dont see how my wimpy to4e is surpassing the abilities of the bov that is SUPPLIED in the kit. . . whats up with that???

paul
Old 02-12-04 | 10:11 PM
  #10  
93BlackFD's Avatar
built my own engine

 
Joined: Dec 2002
Posts: 3,470
Likes: 2
From: Buckhead, Atlanta
you have to adjust the BOV for your setup, that noise is called compresser surge...if the BOV spring tension is not adjusted properly, it will not vent the air sufficiently

the compressed air is bouncing off the throttle body butterflies and your compresser wheel and causing that noise

just shortens the life of the turbos and makes a weird noise...hell some people think it "sounds good"
Old 02-12-04 | 10:36 PM
  #11  
rotorbrain's Avatar
Thread Starter
fart on a friends head!!!
 
Joined: Mar 2002
Posts: 4,104
Likes: 1
From: sheppard AFB, TX
well, i sure dont think it sounds good. . . im gonna open the bov up all the way tomorrow. . . let it go completely loose to see if it does it. why cant the rush to get tuned be a nice one, eh?

paul
Old 02-13-04 | 09:12 AM
  #12  
93BlackFD's Avatar
built my own engine

 
Joined: Dec 2002
Posts: 3,470
Likes: 2
From: Buckhead, Atlanta
yeah, i don't know if going all the way will help it, you kinda have to find the sweet spot...this is really easy to do on a dyno
Old 02-13-04 | 06:45 PM
  #13  
rotorbrain's Avatar
Thread Starter
fart on a friends head!!!
 
Joined: Mar 2002
Posts: 4,104
Likes: 1
From: sheppard AFB, TX
yeah, im sure it is. . . ill be in birmingham for that dyno session. . . i just wanna get this outta the way before then. . . kinda keeps me from looking like a tard and spending more money.

paul
Old 02-13-04 | 07:17 PM
  #14  
DCrosby's Avatar
No it's not Turbo'd
 
Joined: Jun 2002
Posts: 2,511
Likes: 2
From: Los Angeles, Ca
Too Late
Sorry couldn't resist... we all look like tards at times, even my mechanic does sometimes, and we all blow way too much money on our cars...
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
gxl90rx7
Haltech Forum
6
07-01-17 12:30 AM
Linda_Lovelace
General Rotary Tech Support
0
09-18-15 11:04 PM
zxrazorxz
3rd Generation Specific (1993-2002)
2
09-14-15 08:21 PM



Quick Reply: whats this noise???



All times are GMT -5. The time now is 01:14 PM.