3rd Generation Specific (1993-2002) 1993-2002 Discussion including performance modifications and Technical Support Sections.
Sponsored by:

What type of bulb do we have??

Thread Tools
 
Search this Thread
 
Old 10-18-09 | 12:21 AM
  #1  
2RotorsNaDream's Avatar
Thread Starter
¿¿What are pistons??
iTrader: (7)
 
Joined: May 2003
Posts: 1,261
Likes: 0
From: Queens NYC
What type of bulb do we have??

I thought our headlights were H4 but on the Sylvania website it says we have H2/9003 bulbs. I'm buying a plug and play HID kit for the car and need to know. I searched and didnt find anything that was 100% sure.
Old 10-18-09 | 12:35 AM
  #2  
David Hayes's Avatar
Lives on the Forum
iTrader: (6)
 
Joined: Jun 2002
Posts: 6,505
Likes: 181
From: FL
I would have said H4 but you are correct, the guide says 9003.
Old 10-18-09 | 12:46 AM
  #3  
2RotorsNaDream's Avatar
Thread Starter
¿¿What are pistons??
iTrader: (7)
 
Joined: May 2003
Posts: 1,261
Likes: 0
From: Queens NYC
Originally Posted by David Hayes
I would have said H4 but you are correct, the guide says 9003.
Yeah its confusing me, I always thought we had H4s.

BTW hows everything going David? Hows the 3 rotor running?
Old 10-18-09 | 12:50 AM
  #4  
2RotorsNaDream's Avatar
Thread Starter
¿¿What are pistons??
iTrader: (7)
 
Joined: May 2003
Posts: 1,261
Likes: 0
From: Queens NYC
Went to Philips' site and they say 9003 also.
Old 10-18-09 | 12:51 AM
  #5  
David Hayes's Avatar
Lives on the Forum
iTrader: (6)
 
Joined: Jun 2002
Posts: 6,505
Likes: 181
From: FL
Originally Posted by 2RotorsNaDream
Yeah its confusing me, I always thought we had H4s.

BTW hows everything going David? Hows the 3 rotor running?
Going fine. The car is at Kilo Racing. Thought I had a fuel pump go out but it turns out my Microtech temp sensor wires melted and shorted out, causing the temp map to go haywire. Jesus is fixing this as well as relocating my PLX water temp sensor to be behind the thermostat. I'm also having him do a few "bling" things while the car is there Contemplating having the interior redone in all black, with the seats done in leather and the center in Alcantara. We'll see. Hope to have it on the dyno next Saturday or the following week.

FYI - you could always go and pull a bulb out and see what it is. It will be stamped on the metal portion of the bulbs.
Old 10-18-09 | 12:54 AM
  #6  
2RotorsNaDream's Avatar
Thread Starter
¿¿What are pistons??
iTrader: (7)
 
Joined: May 2003
Posts: 1,261
Likes: 0
From: Queens NYC
Its like 40º outside, if not less. I'll go out and check tomorrow.

Edit: Just check an old pair of HIDs I had on the car earlier and they say they're 35W H4s so I guess I'll just order me another set of H4s.
Old 10-18-09 | 04:26 PM
  #7  
MOBEONER's Avatar
It's finally reliable
iTrader: (18)
 
Joined: May 2004
Posts: 3,513
Likes: 10
From: NEW YORK CITY
Are you getting the kit from IRP? I wanna check your bulbs out (pause) when you get them installed.
Old 10-18-09 | 05:08 PM
  #8  
jmadams74's Avatar
Senior Member
 
Joined: Oct 2002
Posts: 526
Likes: 4
From: Atlanta
If you haven't bought the kit yet, take a look at the projector HID kit currently in the group buy section. This is the best light (by far) that I've seen for our cars!
Old 10-18-09 | 05:15 PM
  #9  
Ceylon's Avatar
Non Runner
iTrader: (3)
 
Joined: Mar 2008
Posts: 2,209
Likes: 277
From: Somerset, England
I had a H4 HID 6000k kit. When a ballast & control unit relay died, I ditched it for a set of "H4 Philips X-treme Power +80% bulbs", mainly for simplicity and a tidier engine bay.

They are pretty good, no issues driving at night. They are actually better that the HIDs in my opinion....Don't look so cool though

Link to the bulbs for reference:
http://www.autobulbsdirect.co.uk/H4-...ulbs-pair.html

Ceylon
Old 10-18-09 | 06:43 PM
  #10  
2RotorsNaDream's Avatar
Thread Starter
¿¿What are pistons??
iTrader: (7)
 
Joined: May 2003
Posts: 1,261
Likes: 0
From: Queens NYC
Originally Posted by MOBEONER
Are you getting the kit from IRP? I wanna check your bulbs out (pause) when you get them installed.
No I didnt get them from IRP, I just got them from some spot that my boys got them from for their bikes and cars.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Snook
3rd Generation Specific (1993-2002)
23
09-30-15 12:36 PM
Devon Murray
New Member RX-7 Technical
1
09-26-15 09:15 AM




All times are GMT -5. The time now is 05:29 PM.