3rd Generation Specific (1993-2002) 1993-2002 Discussion including performance modifications and Technical Support Sections.
Sponsored by:

What size is the couplings on the greddy FMIC

Thread Tools
 
Search this Thread
 
Old 07-30-02, 08:01 PM
  #1  
Senior Member

Thread Starter
 
Rx-Revin's Avatar
 
Join Date: Jan 2002
Location: new jersey
Posts: 404
Likes: 0
Received 0 Likes on 0 Posts
Thumbs up What size is the couplings on the greddy FMIC

Th rx7 store sells 2 3/4 id x3 would that fit on the greddy 2 row fmic piping.
Old 07-31-02, 12:07 AM
  #2  
Senior Member

Thread Starter
 
Rx-Revin's Avatar
 
Join Date: Jan 2002
Location: new jersey
Posts: 404
Likes: 0
Received 0 Likes on 0 Posts
^
Old 07-31-02, 09:29 AM
  #3  
Senior Member

 
Join Date: Jul 2001
Location: Sunny Trinidad & Tobago
Posts: 529
Likes: 0
Received 0 Likes on 0 Posts
Check http://www.phase2motortrend.com

... they also have ...ask for Wayne. Nice guy, fast shipping ..no problems.

http://www.phase2motortrend.com/rx7.htm

Silicone Hose Reducers
http://www.phase2motortrend.com/pict...e-reducer2.jpg

Sizes: (3.25"-2.75"$25) (3"-2.75"$23) (2.75"-2.50"$21) (2.5"-2.25"$19.50) (2.5"-2"$18.50



Silicone Hump Hose
http://www.phase2motortrend.com/pictures/humphose1.jpg

Sizes: (3") (2.75") (2.50") (2.25") (2")
Price: $25 $24 $22.50 $20 $18


Silicone Hose Couplers

http://www.phase2motortrend.com/pictures/hose1.jpg
Sizes: (2") (2.25") (2.50") (2.75") (3")
Price: $4 $4.50 $5 $5.50 $6
Length: Every 3" length
Old 07-31-02, 10:36 AM
  #4  
Perpetual Rebuilder

 
shawnk's Avatar
 
Join Date: Mar 2002
Location: Seattle, Washington
Posts: 1,250
Received 0 Likes on 0 Posts
Are you looking to replace the hose clamps that come with the kit with some t-bolt clamps? If so I used the sme-240300 from summitracing.com for all of the couplers (13 total from turbo to elbow) and found these to be a bit big (but they worked). I am not sure if you can drop down to the sme-240275's but am guessing (just a guess mind you - not sure at all) you can and they would look alot better (no long bolt hanging out of the end) and save a buck per to boot. As for the intercooler outlet on the throttlebody side, the pipe is bigger than 3.00" and I got the sme-240400 and it was too big (so I ended up using it for my T04S intake). So the measurement is between 3.00 and 3.81". There are two sizes in that range and I would measure it before I bought again. I had to order these from work from memory and although it worked out I wish I had taken another day and actually measured sizes. Just do a search on summitracing.com for t-bolt.

Also I have good things to say about Wayne if you need any of the stuff that 3rdgen7 listed above. He talked on the phone to me about a Blitz SBC-id (that I didn't buy from him) for about 15 min and is sending me a follow up e-mail to help me out. All this and I havent bought anything from him (yet ) and I can't get a return call or e-mail from the guy I bought $5500 in parts. Thumbs up to you Wayne!

Damn my posts always end up being long!

Shawn
Old 07-31-02, 11:10 AM
  #5  
Senior Member

Thread Starter
 
Rx-Revin's Avatar
 
Join Date: Jan 2002
Location: new jersey
Posts: 404
Likes: 0
Received 0 Likes on 0 Posts
thanks guys...
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
SakeBomb Garage
SakeBomb Garage
9
05-11-20 10:04 AM
SakeBomb Garage
Vendor Classifieds
5
08-09-18 05:54 PM
SakeBomb Garage
Group Buy & Product Dev. FD RX-7
8
10-09-15 10:05 PM



Quick Reply: What size is the couplings on the greddy FMIC



All times are GMT -5. The time now is 01:59 PM.