what happened to CWR (crooked willow racing)
#1
Thread Starter
DRIVE THE ROTARY SPORTS
iTrader: (5)
Joined: May 2003
Posts: 4,150
Likes: 0
From: CA (Bay Area)
what happened to CWR (crooked willow racing)
does anyone know what happened to these guys? i just went to check their website and the link doesnt work. if they are actually gone im pretty sad cause i wanted to buy their dual oil cooler setup with 99 spec bumper ducting. and word on the street was that they made a pretty nice front brake duct setup as well....
#3
They're gone. I can tell you from personal experience that the Rotary Extreme dual 25-row kit works just as well as the CWC kit does, even without ducting (with stock bumper). The RE kit is easier to install and has a MUCH more reliable t-stat connection as is. It was worth the extra money to me when there WAS a choice.
Ntech makes vented backing plates for the front brakes...they're not carbon fiber but should work well. http://www.ntechengineering.com/inde...d=6&model_id=2
I wouldn't spend the money on backing plates unless I was experiencing brake fade on the track even with proper pads/fluid.
Ntech makes vented backing plates for the front brakes...they're not carbon fiber but should work well. http://www.ntechengineering.com/inde...d=6&model_id=2
I wouldn't spend the money on backing plates unless I was experiencing brake fade on the track even with proper pads/fluid.
Last edited by rynberg; 01-27-06 at 06:47 PM.
#4
Where has my $ gone?
iTrader: (12)
Joined: Feb 2004
Posts: 1,654
Likes: 7
From: Bay Area, Cal/Phoenix, AZ
Originally Posted by RotorMotor
if they are actually gone im pretty sad cause i wanted to buy their dual oil cooler setup with 99 spec bumper ducting.
Thread
Thread Starter
Forum
Replies
Last Post
troym55
3rd Generation Specific (1993-2002)
23
05-25-16 12:42 PM
rx8volks
Canadian Forum
0
09-01-15 10:46 PM