I just want to make sure I'm not missing something obvious here, or if maybe someone has already undone the KD rotary anti-det mod.

If you don't already know, the anti-det mod is to remove the trailing plugs, block off the holes, and run only on the leading plugs.


Here is a picture of my ignition coils. Looking at other pictures I've found, it looks like I am missing the leading coil pack because both coil packs I have only have 1 hole for a wire. Does this look/sound correct?


Now if what I said is true (I am missing leading coilpack), I am somewhat confused, becuase they say they remove the trailing plugs, so why do they use the trailing coils packs?

So as far as "removing" the mod, it looks like I just need to take out the plug hole caps, add the leading coil pack, add new plug wires, and 2 more plugs?

 

Check the coil plugs to see if the wire it splice for the 2 trailing coil to work as the leading ones. I got all the stuff if you're in need of.

 

while your down there snag some foamy engine brite and clean that thing up.

But like james said check the coil harness to see if it was hacked apart and made to work, and if its good then just get a new leading coil and replace plugs and wires and you should be good. If the plug harness is toast I think Ray can get you one for something like $80, or you can always try to find one used.

 

Also check the igniter harness to see if it is hacked there.