3rd Generation Specific (1993-2002) 1993-2002 Discussion including performance modifications and Technical Support Sections.
Sponsored by:

Seats in the Spirit R

Thread Tools
 
Search this Thread
 
Old 04-21-06 | 02:31 AM
  #51  
DaiOni's Avatar
Wankler

 
Joined: Apr 2003
Posts: 1,565
Likes: 2
From: Kobe, Japan
here's another one, passenger side too - http://page5.auctions.yahoo.co.jp/jp/auction/e54602538 bargain!

[no PMs please, I prefer to do non-bulky stuff - try ramy]
Old 04-21-06 | 02:54 AM
  #52  
FDNewbie's Avatar
Sponsor
RX7Club Vendor
iTrader: (10)
 
Joined: Jul 2003
Posts: 13,216
Likes: 4
From: Tampa, FL
Hey DaiOni

Yea I saw that one...it's been up there for quite a bit, but I have no idea what the condition is of that left side bolster. He says something about protecting it w/ the leather bolster cover, but I have my doubts as to whether it's beat to hell under there or not. And if that thing is glued or sown on... I suppose if someone wants a seat regardless that would be great, but w/o absolute interest, I don't mess w/ parts of iffy quality...

~Ramy
Old 04-21-06 | 09:08 AM
  #53  
DaiOni's Avatar
Wankler

 
Joined: Apr 2003
Posts: 1,565
Likes: 2
From: Kobe, Japan
I wouldn't be too sure about the lack of bolster condition - the covers have been popular for quite a while now (not surprising - as anyone who has owned or even sat in one of these will admit, they're a pain in the *** to get in and out of - and that's where you will be holding on to).

it looks like there might be a little bit of wear on the center section (though the seller says it's good) - hard to tell, but if I wanted it, I would ask for clarification.

I have a 4-seater, and like it that way, but this one had me tempted. Shame it's the wrong side (for me). I'll probably go with a set of reclinables.
Old 04-21-06 | 10:40 AM
  #54  
afgmoto1978's Avatar
Lift Off in T-Minus...
iTrader: (6)
 
Joined: Jul 2005
Posts: 2,911
Likes: 4
From: Kingman, AZ
Originally Posted by ZumspdRX-7
afgmoto1978. i originally wanted pro2000s for my car, but the measurements are too wide for the cabin. ive found one guy on this site who fit some in, but i wasnt sure how. i then ordered sparco Evo's and they were too tall and too wide. i had to settle for reclinable sparco torinos. looking back, i shouldve gone with recaro pole position wildcat. maybe in a couple years when i start getting serious about auto-xing i will.

Thank you sir, I'll checkout the those recaros, my problem is I'm a big guy - 6' 230lbs and Pro2000s fit me perfectly.
Old 04-21-06 | 10:42 AM
  #55  
Herblenny's Avatar
DGRR 2017 4/26-4/30, 2017
iTrader: (13)
 
Joined: Nov 2001
Posts: 13,597
Likes: 5
From: Alabama
Anyone know where I might be able to pick up one of those bolster cover thingy?

I searched! LOL!
Old 04-21-06 | 10:49 AM
  #56  
quicksilver_rx7's Avatar
Rotary Enthusiast
 
Joined: Feb 2005
Posts: 1,336
Likes: 0
From: Charlotte, NC
Originally Posted by herblenny
Anyone know where I might be able to pick up one of those bolster cover thingy?

I searched! LOL!
Try looking in the classifieds or Ebay, ya damn noob.

Joe

Last edited by quicksilver_rx7; 04-21-06 at 10:54 AM.
Old 04-21-06 | 12:13 PM
  #57  
BlueRex's Avatar
Rotary Freak

 
Joined: Sep 2004
Posts: 2,444
Likes: 0
From: Bay Area, CA
Originally Posted by herblenny
Anyone know where I might be able to pick up one of those bolster cover thingy?

I searched! LOL!
FDNewbie?
Old 04-21-06 | 04:21 PM
  #58  
Herblenny's Avatar
DGRR 2017 4/26-4/30, 2017
iTrader: (13)
 
Joined: Nov 2001
Posts: 13,597
Likes: 5
From: Alabama
Originally Posted by quicksilver_rx7
Try looking in the classifieds or Ebay, ya damn noob.

Joe
I know.. I'm such a Noob!

Here are some pics of my seats in my MB.





Attached Thumbnails Seats in the Spirit R-spiritrmb1.jpg   Seats in the Spirit R-spiritrmb2.jpg   Seats in the Spirit R-spiritrmb3.jpg  
Old 04-21-06 | 04:46 PM
  #59  
GoodfellaFD3S's Avatar
Original Gangster/Rotary!
Veteran: Army
iTrader: (213)
 
Joined: Mar 2001
Posts: 30,580
Likes: 567
From: FL-->NJ/NYC again!
^^Those seats look beautiful Phil. It's a nice bonus that they drop right in and have oem-quality safety engineered into them as well
Old 04-21-06 | 05:08 PM
  #60  
Herblenny's Avatar
DGRR 2017 4/26-4/30, 2017
iTrader: (13)
 
Joined: Nov 2001
Posts: 13,597
Likes: 5
From: Alabama
You can't really see it in the pics but the seats are faded a little.
I would like to re dye it or something but it might be too much of a hassle.. And I think new covers are SUPER expensive.

I've actually contacted Recaro and they said I HAVE to get it thru Mazda as Mazda owns the pattern of the seats or something and they can not make the covers.
Old 04-21-06 | 05:16 PM
  #61  
FDNewbie's Avatar
Sponsor
RX7Club Vendor
iTrader: (10)
 
Joined: Jul 2003
Posts: 13,216
Likes: 4
From: Tampa, FL
Originally Posted by herblenny
Anyone know where I might be able to pick up one of those bolster cover thingy?

I searched! LOL!
Phil, they make a couple of variations of them in Japan. IMHO, the leather ones look like absolute A$$. Here's what the leather one looks like (notice how it jumps out at you...looks very tacky):



Here's a fabric version which is a LOT more subtle and a better choice IMO:



Originally Posted by BlueRex
FDNewbie?
I don't think Phil likes me very much right now... =-/

Originally Posted by herblenny
You can't really see it in the pics but the seats are faded a little.
I would like to re dye it or something but it might be too much of a hassle.. And I think new covers are SUPER expensive.

I've actually contacted Recaro and they said I HAVE to get it thru Mazda as Mazda owns the pattern of the seats or something and they can not make the covers.
Phil, even though I'm sensing some tension right now, if you have any questions about these seats, no matter what they are, I've dealt w/ them man. Trust me about that. I've gotten quotes for the seats, the covers, the rails (w/ and w/o the tilt function), I've harrassed both Recaro and Mazda... etc etc. No reason to reinvent the wheel...

~Ramy
Old 04-21-06 | 05:29 PM
  #62  
Herblenny's Avatar
DGRR 2017 4/26-4/30, 2017
iTrader: (13)
 
Joined: Nov 2001
Posts: 13,597
Likes: 5
From: Alabama
Ramy,

What you talking about! No tension here.
I'm interested in the cloth version of that.. Let me know if you could get them for me.
See you in Bham buddy!

PHIL
Old 04-21-06 | 05:36 PM
  #63  
FDNewbie's Avatar
Sponsor
RX7Club Vendor
iTrader: (10)
 
Joined: Jul 2003
Posts: 13,216
Likes: 4
From: Tampa, FL
Originally Posted by herblenny
Ramy,

What you talking about! No tension here.
You sure??

I'm interested in the cloth version of that.. Let me know if you could get them for me.
Easily done. This is how much fabric comes in one "kit" (one color only of course). Lemme know how many kits/sets you think you'll need. They're very cheap. About $20 a pop.



See you in Bham buddy!

PHIL
Hope that doesn't mean I'm gonna get a bruising when I come LOL.

~Ramy
Old 04-21-06 | 05:59 PM
  #64  
Herblenny's Avatar
DGRR 2017 4/26-4/30, 2017
iTrader: (13)
 
Joined: Nov 2001
Posts: 13,597
Likes: 5
From: Alabama
Originally Posted by FDNewbie
You sure??

Easily done. This is how much fabric comes in one "kit" (one color only of course). Lemme know how many kits/sets you think you'll need. They're very cheap. About $20 a pop.
Sweet! I'll take two of them... in red


Hope that doesn't mean I'm gonna get a bruising when I come LOL.

~Ramy
Well, you are coming down to the DEEP South.. J/k
Old 04-21-06 | 06:16 PM
  #65  
PandazRx-7's Avatar
Fast + Reliable = $$$$$
iTrader: (18)
 
Joined: Nov 2003
Posts: 1,223
Likes: 3
From: SoCal
Ramy, I'll take a couple of the black cloth ones if it's no trouble. No rush though. Thanks.
Old 04-21-06 | 06:18 PM
  #66  
FDNewbie's Avatar
Sponsor
RX7Club Vendor
iTrader: (10)
 
Joined: Jul 2003
Posts: 13,216
Likes: 4
From: Tampa, FL
PandazRx-7, gimme a # plz. Couple = exactly 2?

Thanks
~Ramy
Old 04-21-06 | 07:06 PM
  #67  
7racer's Avatar
Eats, Sleeps, Dreams Rotary
 
Joined: Apr 2001
Posts: 3,736
Likes: 9
From: Dallas, Texas
Phil,

I don't know if you remember ronkmiller. He had a custom shop that could recover the seats it would most likely equal the cost of the seats but could be done.

I was thinking about this for the longest time as it would be nice to get them recovered in ultrasuede. Then it would never wear or fade. It would also probably cost a MINT!!! eh but what doesn't
Old 04-21-06 | 10:07 PM
  #68  
StealthTT's Avatar
Full Member

 
Joined: Apr 2005
Posts: 96
Likes: 0
From: Colorado
Originally Posted by AMRAAM4
My *** hurts just thinking about that.

But thanks...now I have a Recaro seats idea for my interior after seeing those and the pricing. Just wondering what a wedge job and/or PITA install is.
I can think of a few other reasons why your *** hurts..
Old 04-21-06 | 11:45 PM
  #69  
artowar's Avatar
FD3SW211E55
iTrader: (1)
 
Joined: Apr 2003
Posts: 1,826
Likes: 6
From: NoVA
Originally Posted by 7racer
...I don't know if you remember ronkmiller. He had a custom shop that could recover the seats it would most likely equal the cost of the seats but could be done...
I was thinking about that too, but the last time Ron was logged in on this Forum was Nov 11, 2005, and his last post was Nov 10, 2004. Anyone still in contact with him?
Old 04-22-06 | 01:00 AM
  #70  
Herblenny's Avatar
DGRR 2017 4/26-4/30, 2017
iTrader: (13)
 
Joined: Nov 2001
Posts: 13,597
Likes: 5
From: Alabama
Originally Posted by 7racer
Phil,

I don't know if you remember ronkmiller. He had a custom shop that could recover the seats it would most likely equal the cost of the seats but could be done.

I was thinking about this for the longest time as it would be nice to get them recovered in ultrasuede. Then it would never wear or fade. It would also probably cost a MINT!!! eh but what doesn't
I brought one of the seats to local (recommended by many) custom shop and they said they could replicate in real suede for 1400 or 1500 for pair.
Old 04-22-06 | 11:22 PM
  #71  
quicksilver_rx7's Avatar
Rotary Enthusiast
 
Joined: Feb 2005
Posts: 1,336
Likes: 0
From: Charlotte, NC
The seats look bad-*** Phil. Any man would be proud of something of that calibur.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Jeff20B
1st Generation Specific (1979-1985)
73
09-16-18 07:16 PM
SakeBomb Garage
Vendor Classifieds
5
08-09-18 05:54 PM



Quick Reply: Seats in the Spirit R



All times are GMT -5. The time now is 12:18 PM.