SARD Fuel pressure regulator
08-13-05, 05:15 PM
#1
Full Member
Thread Starter
Join Date: Aug 2003
Location: UK
Posts: 141
Likes: 0
Received 0 Likes
on
0 Posts
SARD Fuel pressure regulator
I have a SARD FPR but the instructions are in Japanese. I have never fitted one of these before and would like to know which lines to connect where.
I have a gauge to connect as well.
There is 1 1/8npt at the botom, and 2 on the top. Also there is a vac nipple on the top.
I know where to connect the vac nipple to.
Do I connect the supply (from secondary rail) to the bottom, and the return to tank+gauge in the top? Or is it the other way round?
Thanks
I have a gauge to connect as well.
There is 1 1/8npt at the botom, and 2 on the top. Also there is a vac nipple on the top.
I know where to connect the vac nipple to.
Do I connect the supply (from secondary rail) to the bottom, and the return to tank+gauge in the top? Or is it the other way round?
Thanks
Thread
Thread Starter
Forum
Replies
Last Post
trickster
2nd Generation Specific (1986-1992)
25
07-01-23 04:40 PM
