Running some 2.5 inch plastic ducting to my Rx-7 Fashion Cold air box.
#1
Pimpin Rotors...and Hoes
Thread Starter
Join Date: Feb 2001
Location: New Orleans, LA
Posts: 1,401
Likes: 0
Received 0 Likes
on
0 Posts
Running some 2.5 inch plastic ducting to my Rx-7 Fashion Cold air box.
Hey guys, just thought I'd let you know that it took me about 10 minutes to jack my car up and route some ducting from the passenger side front nose to my rx7 Fashion cold air box and there is a very noticeable difference in turbo response once the car gets going. Although, it is only a 2 inch duct...I do believe there is room for a bigger one. I will try and run a larger one soon as I get some free time and post my results. BTW, have any of you guys tried this??
#2
Full Member
Join Date: Sep 2001
Location: Milwaukee, WI
Posts: 182
Likes: 0
Received 0 Likes
on
0 Posts
Can you post some pics? Did you use the small scoop hole in the front fascia on the passenger side that is normally there for a second oil cooler? If so, how did you route the tubing? Did you use the stock air box?
#4
ZZzzzzz...PHshshshssshh
Join Date: Jul 2001
Location: Washington State
Posts: 985
Likes: 0
Received 0 Likes
on
0 Posts
I'm going to be doing the same thing......I'll be running a foil type tubing thats seemed with alluminum or metal, its flexible fastened with acouple zip-ties.....to my Radiator and my intake.........My FMIC is blocking my radiator, so I hope this helps some..........You can get the tubing at any hardware store........Home Depo, Ace hardware, etc........
Thread
Thread Starter
Forum
Replies
Last Post
sherff
Adaptronic Engine Mgmt - AUS
9
02-24-19 12:09 PM
rkhanso
2nd Generation Specific (1986-1992)
1
08-13-15 11:40 AM