3rd Generation Specific (1993-2002) 1993-2002 Discussion including performance modifications and Technical Support Sections.
Sponsored by:

Running out of options?

Thread Tools
 
Search this Thread
 
Old 11-12-05, 04:37 PM
  #1  
Senior Member

Thread Starter
 
Jetlag's Avatar
 
Join Date: Feb 2001
Location: Corona,CA
Posts: 462
Likes: 0
Received 0 Likes on 0 Posts
Unhappy Running out of options?

Hey Guys,

My car is due for a TEST ONLY emissions test and it has failed twice off the dyno. The operator is a friend of mine and he said that my HC was off the charts. We did not put it on the dyno because it would send the result directly to the EPA/DMV. One of those *******..

Anyhow, the car is stock except for a few mods: Greddy intake, Megan Racing mid pipe with a Magnaflow cat, RB exhaust, and a Greddy 2 row i/c. He over looked the i/c and intake. New plugs were put on, new Magnacore wire, fresh oil, and a brand new cat.

The stock ecu is on, the air pump is working as it should, the ACV or air control valve is working, and the Magna flow cat does have the air pipe connected. I've tried the denatured/gas mix. What can cause the ECU to run so rich? Oh, the TPS was off and was readjusted to spec. The car ran like a champ once I'd adjusted the tps. Has anyone pass Cali emission test with the Magna flow??

Help me keep my FD on the road.

Thanks, Jay
Old 11-12-05, 04:44 PM
  #2  
Registered RX7 Abuser

 
TireSmokin7's Avatar
 
Join Date: Mar 2002
Location: Southern California
Posts: 875
Likes: 0
Received 0 Likes on 0 Posts
When was the last tune up? Hows the air filter, plugs and wires look? Look for the cheap fix first. Hot or cold plugs plugs in it?
Old 11-12-05, 04:49 PM
  #3  
Lives on the Forum

 
rynberg's Avatar
 
Join Date: Dec 2001
Location: San Lorenzo, California
Posts: 14,716
Likes: 0
Received 8 Likes on 8 Posts
I didn't even know Magnaflow made cats....most likely it's just a muffler and you have NO cat!
Old 11-12-05, 04:56 PM
  #4  
Rotary Freak

 
c00lduke's Avatar
 
Join Date: Jan 2002
Location: Overland Park, KS
Posts: 2,360
Likes: 0
Received 0 Likes on 0 Posts
Originally Posted by rynberg
I didn't even know Magnaflow made cats....most likely it's just a muffler and you have NO cat!
You can get cat through them. I think another company might supply them though. But there still is a chance he doesnt have one.
Old 11-12-05, 04:58 PM
  #5  
3rd rotors a charm

iTrader: (4)
 
charlies7's Avatar
 
Join Date: Nov 2003
Location: NW of windy city
Posts: 3,331
Likes: 0
Received 1 Like on 1 Post
stock main cat and stock pre-cat, then just ake it back off again.
Old 11-12-05, 05:18 PM
  #6  
Senior Member

Thread Starter
 
Jetlag's Avatar
 
Join Date: Feb 2001
Location: Corona,CA
Posts: 462
Likes: 0
Received 0 Likes on 0 Posts
No, it's a real Magnaflow cat. I got the mid pipe from a forum member and got the cat form an online vendor. I had a friend of mine tig the cat to the pipe. As a matter of fact, I wished I had my camera to show you the setup. He one of the best fab/welder guy I know. All the tune up parts have less that 200 miles on it. The pre-cat is on too.
Old 11-12-05, 07:04 PM
  #7  
Moderator

iTrader: (7)
 
dgeesaman's Avatar
 
Join Date: May 2002
Location: Fort Kickass
Posts: 12,302
Received 17 Likes on 15 Posts
Pre-cat + high-flow cat should pass easily. No ECU codes? Is the O2 sensor grounded well?

Dave
Old 11-13-05, 01:00 AM
  #8  
Senior Member

Thread Starter
 
Jetlag's Avatar
 
Join Date: Feb 2001
Location: Corona,CA
Posts: 462
Likes: 0
Received 0 Likes on 0 Posts
No codes. O2 grounded? It's just one wire to the connector right? Would a bad O2 cause such a rich running condition?
Old 11-13-05, 02:10 AM
  #9  
Registered RX7 Abuser

 
TireSmokin7's Avatar
 
Join Date: Mar 2002
Location: Southern California
Posts: 875
Likes: 0
Received 0 Likes on 0 Posts
There are suposed to be 2 ground straps bolted directed to the exhaust pipe. One by the cat and the other near the tail pipe. Not proper grounding to the exhaust will give bad O2 signals to the computer.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
trickster
2nd Generation Specific (1986-1992)
25
07-01-23 04:40 PM
mr.veilsidewankel
20B Forum
17
08-20-15 03:20 PM



Quick Reply: Running out of options?



All times are GMT -5. The time now is 02:11 PM.