3rd Generation Specific (1993-2002) 1993-2002 Discussion including performance modifications and Technical Support Sections.
Sponsored by:

Rewire stock coils and/or HKS Twin Power

Thread Tools
 
Search this Thread
 
Old 01-15-16 | 03:44 PM
  #1  
cib24's Avatar
Thread Starter
Senior Member

 
Joined: May 2015
Posts: 335
Likes: 13
From: UK
Rewire stock coils and/or HKS Twin Power

I know a HKS Twin Power is a recommended mod to improve the stock ignition system but should you also add a relay for a 12v source of power to the coils, kinda like the fuel pump rewire mod? OR is it either HKS or coil rewire (i.e. not both)?
Old 01-17-16 | 03:32 PM
  #2  
IRPerformance's Avatar
Sponsor
iTrader: (41)
 
Joined: Apr 2003
Posts: 11,347
Likes: 317
From: NJ
It doesn't work that way unfortunately. Twinpower or step up to the IGN 1A coil setup. I sell a lot of the Sakebomb kits.
Old 01-17-16 | 04:47 PM
  #3  
cib24's Avatar
Thread Starter
Senior Member

 
Joined: May 2015
Posts: 335
Likes: 13
From: UK
Originally Posted by IRPerformance
It doesn't work that way unfortunately. Twinpower or step up to the IGN 1A coil setup. I sell a lot of the Sakebomb kits.
Thanks. I asked the question because I have a HKS Twin Power but not installed and I had also read about direct wiring the stock coils. I wasn't sure if it was recommended to direct wire the coils before installing the HKS unit.
Old 01-17-16 | 05:43 PM
  #4  
IRPerformance's Avatar
Sponsor
iTrader: (41)
 
Joined: Apr 2003
Posts: 11,347
Likes: 317
From: NJ
I recommend leaving the factory coil wiring alone and use the twinpower rotary harness. If the OEM coil harness is in poor condition replace that with a new oem one as well.




All times are GMT -5. The time now is 03:51 PM.