3rd Generation Specific (1993-2002) 1993-2002 Discussion including performance modifications and Technical Support Sections.
Sponsored by:

Rebuild time?

Thread Tools
 
Search this Thread
 
Old 12-07-15 | 04:52 PM
  #1  
ryeguy's Avatar
Thread Starter
Junior Member
 
Joined: Aug 2013
Posts: 27
Likes: 1
From: SD
Rebuild time?

Hey guys so my motor has been rebuilt before and currently has around 70k on the rebuilt motor, it still feels very strong and doesn't smoke but I was wondering if I should rebuild it again before going single turbo. Would a compression test be the first thing to do even though the engine feels good? Anyways, thanks in advance!
Old 12-07-15 | 05:32 PM
  #2  
IRPerformance's Avatar
Sponsor
iTrader: (41)
 
Joined: Apr 2003
Posts: 11,347
Likes: 317
From: NJ
Yes I definitely recommend rebuilding before further modifying the car and adding further stress. At the very least I would do a compression test. Also, I would consider what seals and other parts were used in the past rebuild.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
tnttomto
New Member RX-7 Technical
7
02-19-16 03:17 PM
Jturbo
3rd Generation Specific (1993-2002)
5
12-04-15 11:19 AM
Tdskip
1st Generation Specific (1979-1985)
7
12-02-15 05:35 PM




All times are GMT -5. The time now is 03:56 PM.