pulsation damper, what the hell is that?
#4
well... i don't know about you... but smelling bad is not a problem considering that it leaks fuel ONTO YOUR ENGINE! This can actually cause engine fires and should be changed ASAP.
BTW... it costs friggin $130 USD!!!
BTW... it costs friggin $130 USD!!!
#7
Eye In The Sky
iTrader: (2)
Join Date: Feb 2001
Location: In A Disfunctional World
Posts: 7,902
Likes: 0
Received 119 Likes
on
69 Posts
The FPD has a higher rate of low mileage failures with the FDs than the FCs. Should be replace when doing an engine rebuild if it has over 60k miles on it. If not, your car can go up in smoke.
Now what does the fuel pulsation dampner do? As its name
implies, it reduces pressure surges/pulses in the fuel system near the injectors. These pulses/surges are caused when the fuel pressure changes abruptly or when the secondary injectors open quickly. Like evertime you stomp on the gas.
Now what does the fuel pulsation dampner do? As its name
implies, it reduces pressure surges/pulses in the fuel system near the injectors. These pulses/surges are caused when the fuel pressure changes abruptly or when the secondary injectors open quickly. Like evertime you stomp on the gas.
Trending Topics
#10
it's located by the injectors UNDER the upper intake manifold. It might catch fire cuz...
1. it sits about 1 inch off the engine block
2. the rubber nipple it has deteriorates and will begin to LEAK fuel ON TOP of your engine.
1. it sits about 1 inch off the engine block
2. the rubber nipple it has deteriorates and will begin to LEAK fuel ON TOP of your engine.
#14
thats not paint....
Do any of you guys have pics of it? I am pretty sure that mine is leaking because my car smells like fuel 5 feet away from it and I would like to fix that before my car decides to catch fire. I am also getting shitty gas mileage.
#15
it goes at the end of the fuel rail... looks like a dashpot witha 1mm rubber pug on the top. The whole thing is about the diameter of a quarter and maybe 1 inch tall with metal tube running under it. If I only had my digital camera i could take a pic for you.
#19
thats not paint....
sorry, answered my own question on search. I dont know if I really want to pull out the whole rats nest as well though... do you guys think it would be worth it to take it to a shop?
#21
Senior Member
Join Date: Jul 2001
Location: Sarasota FL/Ft Lauderdale
Posts: 483
Likes: 0
Received 0 Likes
on
0 Posts
If you smell fuel in you'r engine compartment it is most likely you'r dampner. Either way stop driving you'r car till you fix the problem. Or start carrying a six pack of hot dogs with you at all times so you can at least have a hot meal while you wait for the fireman to come and give you'r 7 a nice wash down.
#22
It's never fast enough...
Join Date: Feb 2001
Location: Miami - Given 1st place as the POOREST city in the US as per the federal government
Posts: 3,760
Likes: 0
Received 3 Likes
on
3 Posts
You gotta remove a LOT of **** to get to it.
Here is a nice list of things you can do at the same time:
1) Replace all your vacum hoses
2) Send injectors out to be cleaned
3) Replace spark plug wires
4) Replace sparl plugs while you at it :p
5) Polish upper intake
6) Check for bad or cracked turbo coolant hoses
Here is a nice list of things you can do at the same time:
1) Replace all your vacum hoses
2) Send injectors out to be cleaned
3) Replace spark plug wires
4) Replace sparl plugs while you at it :p
5) Polish upper intake
6) Check for bad or cracked turbo coolant hoses
#23
Full Member
Join Date: Feb 2001
Location: woodstock,Ga
Posts: 172
Likes: 0
Received 0 Likes
on
0 Posts
That is your pressure regulator not the pulsation damper. The damper is behind the primaries. You have three hoses by your oil filter (2 fuel hoses, 1 from the fuel tank, 1 going to the fuel tank, and the other hose sends gas fumes to the charcoal canister) The fuel hose closest to the front goes directly to the PD. When you replace the PD DO NOT forget to replace the o-ring, make sure the new one comes with one. One tip is to cut the fuel hose and put new Mazda HIGH PRESSURE FUEL HOSE, don't waste your time trying to pull them off because it won't happen.
Later,
Later,
#25
Senior Member
Join Date: Feb 2001
Location: West Covina, CA, USA
Posts: 418
Likes: 0
Received 0 Likes
on
0 Posts
here's an advantage of getting the Skyline fuel pump instead of the other fuel pumps. It has the pulsation dampner built onto the pump! much more logical, mazda engineers must've been drunk at the time to have it well hidden to start fires...
David
David