Power plant frame
#1
Junior Member
Thread Starter
Join Date: May 2007
Location: Iceland
Posts: 21
Likes: 0
Received 0 Likes
on
0 Posts
Power plant frame
My stock power plant frame is broken.
Where can i get an aftermarket alternative?
I know SR motorsports make one but for 650$ i could make one out of Stainless steel
Where can i get an aftermarket alternative?
I know SR motorsports make one but for 650$ i could make one out of Stainless steel
#3
Junior Member
Thread Starter
Join Date: May 2007
Location: Iceland
Posts: 21
Likes: 0
Received 0 Likes
on
0 Posts
I was meaning that SS is much more expencive than plain steel, not that it would use it
#4
Racing Rotary Since 1983
iTrader: (6)
the PPF resists engine twist (torque) and the pinion gear attempting to ride up the ring gear as the car is powered forward.
since the stock FD has 184 foot pounds of torque and modded Fds often double that # the stock PPF often needs help.
what you need is not a stronger PPF but a couple of helpers.
please see post 82 in my suspension thread for pics and an explanation. once you have the two helper items i recommend you just buy a used but uncracked OEM PPF in the classifieds.
link: https://www.rx7club.com/showthread.p...06#post7858806
good luck,
howard coleman
since the stock FD has 184 foot pounds of torque and modded Fds often double that # the stock PPF often needs help.
what you need is not a stronger PPF but a couple of helpers.
please see post 82 in my suspension thread for pics and an explanation. once you have the two helper items i recommend you just buy a used but uncracked OEM PPF in the classifieds.
link: https://www.rx7club.com/showthread.p...06#post7858806
good luck,
howard coleman
Thread
Thread Starter
Forum
Replies
Last Post
aftermarket, car, cracked, fc, frame, mazda, mazdaspeed, modify, plant, power, powerplant, racing, rx7, rx7club, stronger