People with 99 spec bumpers? brake ducts or no?
10-13-05 | 12:40 AM
#52
Originally Posted by Jason
Good question. I would say in the past 3 years I have sold one 99 undertray. Im not sure if people are modifying the stock tray or just taking it off. I will be installing a 99 bumper tomorrow and will check if the stock tray works.
Jason
Jason
But even with 99 underbelly, you would need to cut some parts to fit it under.
Also, I might take both of your 99 underbelly from you Jason! PM me and let me know what the shipping might be to 35210.
10-13-05 | 02:36 AM
#53
Originally Posted by herblenny
But even with 99 underbelly, you would need to cut some parts to fit it under.
What would you need to cut or trim? It mounts to all the same spots on the sub frame & has the same hole pattern as the 99 spoiler lip on the bumper.
Same story with the brake ducts. Direct bolt-on.
Do "YOU" actually have the complete 99 front end???? Or are you just guessing?
The R-Magic ducts look similar to the RE Ducts you have pictured. Except all the edges fit the contour of the oil cooler inlets on the 99 bumper & in fact overlap it by 1/2" or so (tight fit).
10-13-05 | 08:36 AM
#56
Originally Posted by herblenny
But even with 99 underbelly, you would need to cut some parts to fit it under.
Originally Posted by HDP
So they are the same except for the "air baffle" below the radiator/condenser and a few additional holes at the nose?
10-13-05 | 09:48 AM
#57
The front corners of the '99 undertray are a little different.
I also had to cut my tray some, but that was because of the Tri-point sway bar.
No, I am not using the '99 bumper yet. But am using the '99 lower lip, under tray and L/R brake ducts. The lip fits up much better with the other '99 parts and looks better with the brake openings lining up with the ducting behind.
I also had to cut my tray some, but that was because of the Tri-point sway bar.
No, I am not using the '99 bumper yet. But am using the '99 lower lip, under tray and L/R brake ducts. The lip fits up much better with the other '99 parts and looks better with the brake openings lining up with the ducting behind.
Last edited by Julian; 10-13-05 at 09:51 AM.
10-13-05 | 10:01 AM
#58
Originally Posted by Julian
The front corners of the '99 undertray are a little different.
I also had to cut my tray some, but that was because of the Tri-point sway bar.
I also had to cut my tray some, but that was because of the Tri-point sway bar.
10-13-05 | 11:25 AM
#59
Originally Posted by Sled Driver
No you don't....................
Do "YOU" actually have the complete 99 front end???? Or are you just guessing?
Do "YOU" actually have the complete 99 front end???? Or are you just guessing?
Wait, I have 2 of them! Complete OEM 99s with underbellies, brake ducts, etc.. only thing missing are the oil cooler ducts.. but I'm about to install the RE version.
Maybe this is a 93 thing.. My swaybar area didn't fit correctly.
If you fitted them, I would like to see how you did it.. I'm going to get another underbelly and put it on.
Last edited by Herblenny; 10-13-05 at 11:32 AM.
10-13-05 | 01:11 PM
#60
Originally Posted by Sled Driver
The R-Magic ducts look similar to the RE Ducts you have pictured. Except all the edges fit the contour of the oil cooler inlets on the 99 bumper & in fact overlap it by 1/2" or so (tight fit).
What I am hoping is that you have a pic that shows the skin residing in the correct place as if the fiberglass ducting was not there.
Do these Rmagic FG ducts force the skin away from its natural position, or do they have the same problems as the RE ones?
10-13-05 | 01:25 PM
#61
Originally Posted by herblenny
Maybe this is a 93 thing.. My swaybar area didn't fit correctly.
If you fitted them, I would like to see how you did it.. I'm going to get another underbelly and put it on.
If you fitted them, I would like to see how you did it.. I'm going to get another underbelly and put it on.
-edit- I have a '93 also
Last edited by afterburn27; 10-13-05 at 01:27 PM.
10-13-05 | 01:26 PM
#62
Originally Posted by herblenny
Maybe this is a 93 thing.. My swaybar area didn't fit correctly.
I have the David Breslau Widefoot Racing sway bars mounts now. They don't hang down as far as the stockers.The belly pan has lots of clearance there.
I said "guessing" because I didn't want to **** you off.
Instead of saying "or are you talking out your ***?" (normal responce by me, nothing personal)
IM trying to be a nicer guy on the form. People can be sooooo sensitive.
10-13-05 | 01:55 PM
#63
Originally Posted by Sled Driver
I bent & cracked my stock sway bar mounts years ago...............
I have the David Breslau Widefoot Racing sway bars mounts now. They don't hang down as far as the stockers.The belly pan has lots of clearance there.
I said "guessing" because I didn't want to **** you off.
Instead of saying "or are you talking out your ***?" (normal responce by me, nothing personal)
IM trying to be a nicer guy on the form. People can be sooooo sensitive.
I have the David Breslau Widefoot Racing sway bars mounts now. They don't hang down as far as the stockers.The belly pan has lots of clearance there.
I said "guessing" because I didn't want to **** you off.
Instead of saying "or are you talking out your ***?" (normal responce by me, nothing personal)
IM trying to be a nicer guy on the form. People can be sooooo sensitive.
10-13-05 | 09:09 PM
#65
Originally Posted by HDP
Well, do you have pics of the brake ducts that eliminate the oil cooler ducting?
Originally Posted by rotarypower101
I have the “99 spec front bumper oil cooling ducts” as have been described to me,and is on the purchase slip from corksport, which is the black plastic trays that reside under the oil coolers. And the RE oil cooler ducts, which unfortunately I do not have a pic with the skin on, but it does make the top skin of the oil cooler duct protrude down to my disliking.
That's why I added the R-Magic dedicated oil cooler ducts to my car. I wanted to get the maximum cooling I could on the track.
Where the plastic tray attaches to the fender liner I cut a rectangle hole to direct the airflow to the front brakes. Similar position as my original R1 brake ducts had.
Last edited by Sled Driver; 10-13-05 at 09:13 PM.
10-14-05 | 12:43 AM
#66
Originally Posted by Sled Driver
I bent & cracked my stock sway bar mounts years ago...............
I have the David Breslau Widefoot Racing sway bars mounts now. They don't hang down as far as the stockers.The belly pan has lots of clearance there.
I said "guessing" because I didn't want to **** you off.
Instead of saying "or are you talking out your ***?" (normal responce by me, nothing personal)
IM trying to be a nicer guy on the form. People can be sooooo sensitive.
I have the David Breslau Widefoot Racing sway bars mounts now. They don't hang down as far as the stockers.The belly pan has lots of clearance there.
I said "guessing" because I didn't want to **** you off.
Instead of saying "or are you talking out your ***?" (normal responce by me, nothing personal)
IM trying to be a nicer guy on the form. People can be sooooo sensitive.
If you don't mind and when you get a chance, can you shoot me some pics of your widefoot racing sway bar mounts and the 99 belly. I was thinking about getting that set up. How do you like it?? are you using different sway bar also??
Thread
Thread Starter
Forum
Replies
Last Post
82streetracer
1st Generation Specific (1979-1985)
7
08-23-15 10:28 AM
Frisky Arab
2nd Generation Specific (1986-1992)
13
08-18-15 06:30 PM
