optinal armrest question
#26
A Fistfull of Dollars!
iTrader: (2)
Originally Posted by DaiOni
should be a perfect fit - or at least very very close to it.
#27
A Fistfull of Dollars!
iTrader: (2)
Originally Posted by busy13b
Mine fits about 97% perfectly. It sits fairly flush, but has that ever-so slight fitment issue becasue it was designed for the LHD models.
#29
yeah - direct from a mazda dealership - there's no mystery to it.
as for the possible fit issues - it's obvious some people have a problem, some don't. I personally don't think it's a LHD/RHD issue, but the difference between version I consoles, and version II-VI. I'll elaborate on that tomorrow.
as for the possible fit issues - it's obvious some people have a problem, some don't. I personally don't think it's a LHD/RHD issue, but the difference between version I consoles, and version II-VI. I'll elaborate on that tomorrow.
#30
Banned. I got OWNED!!!
Join Date: Dec 2003
Location: Corpus Christi, TX
Posts: 1,545
Likes: 0
Received 0 Likes
on
0 Posts
DaiOni---Sucks on the price change.
As for fitment, I had the cool light just like the models in the US, but yes the contour is a little different, but I have seen some of my customers rides in person and it looks like the same fit we have over here, just the door is backwards.
As for fitment, I had the cool light just like the models in the US, but yes the contour is a little different, but I have seen some of my customers rides in person and it looks like the same fit we have over here, just the door is backwards.
#33
1993 VR FD Touring
Join Date: Jun 2004
Location: USA
Posts: 650
Likes: 0
Received 0 Likes
on
0 Posts
okay, now I am all confused. If I do get one, I will probably get one off of RX7.com. Now, my question is, is the one they sell there for LHD or RHD? Will I have fitment problems then too?
#38
A Fistfull of Dollars!
iTrader: (2)
Originally Posted by RX 4 Speed
okay, now I am all confused. If I do get one, I will probably get one off of RX7.com. Now, my question is, is the one they sell there for LHD or RHD? Will I have fitment problems then too?
#39
1993 VR FD Touring
Join Date: Jun 2004
Location: USA
Posts: 650
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by HDP
The one you will receive is made for RHD, but will fit LHD. US models did not have the Non-Smoker Option, so there were no LHD armrests made ( to my knowledge).
#40
If you play w/ it a bit, it WILL fit. I and others have posted that they have zero fitment problems. There are no versions of this...all the armrests are the same. So again, you may just need to wiggle it around a little until you get it to fit properly.
Oh and just outta curiosity, the others who have no fitment problems, what year is your FD? Mine's a 94... (curious if there's a pattern re: fitment in 94s and 95s)
Oh and just outta curiosity, the others who have no fitment problems, what year is your FD? Mine's a 94... (curious if there's a pattern re: fitment in 94s and 95s)
#41
after looking through everything...it drops in fine but the the drivers side has a LITTLE gap, wont even really be noticed. dont worry about fitment issues..like what fdnewbie said, just play around with it and youll get a good fit.
and there might even be a little difference between the shifter panels too. i have a 94 also..but no idea how people with 93s had it fit
and there might even be a little difference between the shifter panels too. i have a 94 also..but no idea how people with 93s had it fit
#44
13B Rotary Turbo
Join Date: Dec 2004
Location: South California
Posts: 649
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by FDNewbie
Oh and just outta curiosity, the others who have no fitment problems, what year is your FD? Mine's a 94... (curious if there's a pattern re: fitment in 94s and 95s)
#45
It wasn't in the GB section, but the parts section - originally I intended to sell them individually, but the price of the copies is so low - that I had to GB the originals. I'm not sure about the quality of the copy - I've never eyeballed one, but the OEM part is, of course, perfect.
If there was going to be a fitment issue, I would have thought it would have been with the earliest production run (type I in japan, 91-93 - I think those are all plated 93 in the US). I originally tried to order the part via a honda dealership that I work part-time at. They said that it wouldn't fit, and that I'd need the whole console section. I checked with JT, and he gave me the parts #, and the reassurance that it would work. So I went direct to the local mazda dealership and got the part - which fits perfectly. In hindsight, I wonder if the honda dealership thought I have a type I (I have a late 93 - one of the first type IIs). Anyway... that's my little story for the day.
If there was going to be a fitment issue, I would have thought it would have been with the earliest production run (type I in japan, 91-93 - I think those are all plated 93 in the US). I originally tried to order the part via a honda dealership that I work part-time at. They said that it wouldn't fit, and that I'd need the whole console section. I checked with JT, and he gave me the parts #, and the reassurance that it would work. So I went direct to the local mazda dealership and got the part - which fits perfectly. In hindsight, I wonder if the honda dealership thought I have a type I (I have a late 93 - one of the first type IIs). Anyway... that's my little story for the day.
#46
oh, and as for the possibility of another GB. Definitely in the future, but maybe not for a while. I'm moving 1000km south next month - so all parts 'services' will cease for a little while (until I'm settled, and can work out where the closest mazda dealership is!)
#47
Rotary4Ever
Join Date: Feb 2002
Location: Canada,Québec
Posts: 178
Likes: 0
Received 0 Likes
on
0 Posts
Mine doesnt fit at all. I just get it today and went to drop the armrest in his place and only 3 corner on 4 go flush to the center console. I'm really disappoint....Someone have a solution ..... ?????