OMP nozzles??
#26
Rotary Powered Boobies
iTrader: (1)
Join Date: Oct 2001
Location: Miami Beach
Posts: 2,530
Likes: 0
Received 0 Likes
on
0 Posts
The holes on my housings where the two oil injectors go have been sealed. Do you guys think it's ok to use the RA adaptor http://rotaryaviation.com/oil_inject...p_adaptors.htm with just two injectors into the intake manifold.
So FD oil injectors work better than previous years?
from this paragraph about 11 paragraphs up from the bottom “Apex seal lubrication has become a critical issue. In a race engine, oil supply to the rotor housing by means of injection was precisely monitored and controlled, whereas in the production unit, a larger amount is supplied, just to be on the safe side. Some of the lubricant is fed into the trochoid chamber through a metering nozzle. The previous nozzle's oil passage was 2.0 mm (0.08 in.) in diameter. Negative pressure created in the rotor chamber would cause all the oil within the nozzle to be sucked out
Last edited by luiml73; 03-01-05 at 09:00 PM.
Thread
Thread Starter
Forum
Replies
Last Post