3rd Generation Specific (1993-2002) 1993-2002 Discussion including performance modifications and Technical Support Sections.
Sponsored by:

Official FD 3d printing/scanning thread.

Thread Tools
 
Search this Thread
 
Old 10-28-24 | 09:11 AM
  #1  
need-a-t2's Avatar
Thread Starter
Rotary Freak
iTrader: (10)
 
Joined: Mar 2002
Posts: 1,545
Likes: 397
From: binghamton, ny
Official FD 3d printing/scanning thread.

In an effort to not clutter up everyone else thread, I thought it would be a good idea to start a thread dedicated to FD parts for 3D printing and scanning. A place to post the files that you've made as well as a place for people to request parts. Places I usually post my files are thingiverse and printables, so searching around there is a good start if you're looking for a particular part, but there are lots of other file hosting sites as well.

I'll kick us off:

RX8 to FD DBW pedal adapter


GM 90mm TB to FD UIM adapter


water pump dust cover


FD seat belt retainer


Last edited by gracer7-rx7; 10-29-24 at 04:55 PM.
The following 6 users liked this post by need-a-t2:
b3delta (10-29-24), boostin13b (10-28-24), estevan62274 (10-28-24), faze (10-28-24), gracer7-rx7 (10-29-24), Watch_Me (10-28-24) and 1 others liked this post. (Show less...)
Old 10-28-24 | 09:17 AM
  #2  
need-a-t2's Avatar
Thread Starter
Rotary Freak
iTrader: (10)
 
Joined: Mar 2002
Posts: 1,545
Likes: 397
From: binghamton, ny
Compliments of Watch_Me

FD rear speaker grills

The following 3 users liked this post by need-a-t2:
b3delta (10-29-24), estevan62274 (10-28-24), Watch_Me (10-28-24)
Old 10-28-24 | 09:41 AM
  #3  
iceman4357's Avatar
Rotary Freak
iTrader: (2)
 
Joined: Jan 2004
Posts: 1,949
Likes: 150
From: St.Louis
Good idea! As NLA parts become more common, I think 3D printed and used parts will be the only solutions. We should consider this to be a Sticky and have people add to the thread as new items are developed.

Eric
The following 4 users liked this post by iceman4357:
b3delta (10-29-24), estevan62274 (10-28-24), need-a-t2 (10-28-24), Watch_Me (10-28-24)
Old 10-28-24 | 10:38 AM
  #4  
Watch_Me's Avatar
Trained Idiot
 
Joined: Apr 2024
Posts: 11
Likes: 13
From: South Carolina
Here is just a fun one, just some rotor ***** to replace the standard HVAC *****

Mount the same as the stock *****
The following users liked this post:
need-a-t2 (10-28-24)
Old 10-28-24 | 12:44 PM
  #5  
Redbul's Avatar
Lives on the Forum
iTrader: (27)
 
Joined: Mar 2015
Posts: 5,481
Likes: 1,309
From: B.C.
Here are some pieces that might be good targets for 3D printing. Some are already being made, here and there.




Old 10-28-24 | 04:19 PM
  #6  
Lowe_FD's Avatar
Full Member
iTrader: (1)
 
Joined: Aug 2019
Posts: 112
Likes: 17
From: Atlanta, Georgia
Recently remade the on-pedal stopper for the clutch safety switch. https://grabcad.com/library/neutral-...itch-stopper-1



After sanding, priming, and painting:

The following 2 users liked this post by Lowe_FD:
KYPREO (10-28-24), need-a-t2 (10-28-24)
Old 10-28-24 | 06:05 PM
  #7  
faze's Avatar
Junior Member
 
Joined: Aug 2024
Posts: 13
Likes: 2
From: Vancouver, BC
Material

Hey what material did you use for the water pump cover, I’ve only printed PLA so far which isn’t suitable for high temps
Old 10-28-24 | 08:25 PM
  #8  
Watch_Me's Avatar
Trained Idiot
 
Joined: Apr 2024
Posts: 11
Likes: 13
From: South Carolina
It seems like he was just using that as a dust cover. If you were to use that on there permanently for whatever reason, you would have to make it/ cut it out of metal
The following users liked this post:
Turblown (10-29-24)
Old 10-28-24 | 08:28 PM
  #9  
faze's Avatar
Junior Member
 
Joined: Aug 2024
Posts: 13
Likes: 2
From: Vancouver, BC
Originally Posted by Watch_Me
It seems like he was just using that as a dust cover. If you were to use that on there permanently for whatever reason, you would have to make it/ cut it out of metal
I see, I’ve heard of carbon fibre infused nylon material that are able to withstand such temps, I thought maybe it was one of those
Old 10-29-24 | 02:04 AM
  #10  
Redbul's Avatar
Lives on the Forum
iTrader: (27)
 
Joined: Mar 2015
Posts: 5,481
Likes: 1,309
From: B.C.
I think Code red offers downloads for some of their pieces.


https://coderedperformance.com/colle...WPh_hYIqduJ4ph
Old 10-29-24 | 09:43 AM
  #11  
Watch_Me's Avatar
Trained Idiot
 
Joined: Apr 2024
Posts: 11
Likes: 13
From: South Carolina
Thanks to Seven!! for giving me permission to upload this for everyone to have in their library. He made these scans, I just did some slight cleanup on them, and the credit goes completely to him. FD3S door defrost vents https://www.printables.com/model/105...-defrost-vents

(These are for the driver and passenger side. The way I made mounting holes for them was to, drill out the legs where the screws would go on the model, and then melt a brass threaded insert into the hole, and then a screw holds it super tight after that)






Old 10-29-24 | 09:52 AM
  #12  
ptrhahn's Avatar
Lives on the Forum
iTrader: (9)
 
Joined: Feb 2002
Posts: 9,135
Likes: 568
From: Arlington, VA
Since Shapeways went **** up, you can't get the cruise control switch (or headlight pop up switch) blank anymore. Anybody make them or have access to that 3D file?

P
Old 10-29-24 | 12:16 PM
  #13  
gracer7-rx7's Avatar
needs more track time
iTrader: (16)
 
Joined: Mar 2006
Posts: 9,376
Likes: 608
From: Bay Area CA
Good idea for a thread. Added to FAQ.


Figured it might be worth mentioning Drakelore as a guy making 3d parts for FDs
https://www.draklore.com/

I think Kevin Doe had posted some files once upon a time too if anyone wants to research. https://www.rx7club.com/members/kevin-doe-32323/

Last edited by gracer7-rx7; 10-29-24 at 12:20 PM.
The following users liked this post:
need-a-t2 (10-29-24)
Old 10-29-24 | 12:18 PM
  #14  
gracer7-rx7's Avatar
needs more track time
iTrader: (16)
 
Joined: Mar 2006
Posts: 9,376
Likes: 608
From: Bay Area CA
https://www.rx7club.com/3rd-gen-gene...sills-1167687/
3d printed fix for door sills
Old 10-29-24 | 03:13 PM
  #15  
need-a-t2's Avatar
Thread Starter
Rotary Freak
iTrader: (10)
 
Joined: Mar 2002
Posts: 1,545
Likes: 397
From: binghamton, ny
Compliments of Spalato
Door panel locator pins


his thread about it here:
https://www.rx7club.com/3rd-generati...-pins-1163306/
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
gmanpie
3rd Gen General Discussion
7
04-19-20 10:14 AM
TwinCharged RX7
3rd Generation Specific (1993-2002)
14
10-10-09 01:05 PM
TwinCharged RX7
3rd Generation Specific (1993-2002)
16
10-08-09 06:45 PM
TwinCharged RX7
3rd Generation Specific (1993-2002)
8
10-07-09 11:12 PM
TwinCharged RX7
3rd Generation Specific (1993-2002)
5
10-06-09 02:57 PM



Quick Reply: Official FD 3d printing/scanning thread.



All times are GMT -5. The time now is 09:49 PM.