Non-seq and Sequential SWITCHABLE
#26
Senior Member
Join Date: Apr 2001
Location: Seattle, WA
Posts: 528
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by rx7tturbo
Gene,
Per your instruction on the webpage, the 3 wires going "TO Solenoid", is it referring to the 4U wire on the back of the ECU or is it going to an actual Solenoid?
Thanks.
Gene,
Per your instruction on the webpage, the 3 wires going "TO Solenoid", is it referring to the 4U wire on the back of the ECU or is it going to an actual Solenoid?
Thanks.
You have to cut the wires which actually go from the ECU to the solenoids.
So its actually ECU -> switch -> solenoid (*the wires lead to the solenoid).
Does this make sense?
Gene
#27
1JZ powered
Join Date: Jul 2001
Location: Where there's only two seasons, hot and wet! I love Okinawa
Posts: 4,423
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by Dont_Be_A_Rikki
J,
what did you use?
J,
what did you use?
#28
Glug Glug Glug Burp
Join Date: Jan 2002
Location: Scott AFB, IL
Posts: 3,819
Likes: 0
Received 0 Likes
on
0 Posts
Ok, here's another question. If the switch is set to sequential and the PMS is set for twins...what happens when you flip the switch to non seq when each turbo is set for 12 lbs? It seems like you would have to go back in and reprogram the twin setting for lower boost on each turbo to get the same amount of boost as in seq.... Help please!!
#29
Passenger
Posts: n/a
Originally posted by jspecracer7
With tjhe PFC, you can disconnect ALL of them, leave them hanging and nothing is affected...SERIOUSLY! My car's a testament to the fact. In fact...ask the S14 about how bad I WHOOPED him to find out if my non-sequentials work
With tjhe PFC, you can disconnect ALL of them, leave them hanging and nothing is affected...SERIOUSLY! My car's a testament to the fact. In fact...ask the S14 about how bad I WHOOPED him to find out if my non-sequentials work
#30
Senior Member
Join Date: Feb 2001
Location: Carl Junction, MO
Posts: 310
Likes: 0
Received 0 Likes
on
0 Posts
for those with the PFC...are you running the same maps when you do the switch?..or do you modify them just a bit. and one last thing (it was asked before, but not really answered) do i leave the my PFC set to the default twin turbo setup,sequential, even when i'm running non-seq? this mod is going down this weekend....i can't wait! thanks again Ryan and Gene for posting the setups.
Last edited by Mikey; 06-11-02 at 12:02 PM.
#31
Senior Member
Thread Starter
iTrader: (1)
Join Date: Feb 2001
Location: Charleston, WV
Posts: 610
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by jdhuegel1
Ok, here's another question. If the switch is set to sequential and the PMS is set for twins...what happens when you flip the switch to non seq when each turbo is set for 12 lbs? It seems like you would have to go back in and reprogram the twin setting for lower boost on each turbo to get the same amount of boost as in seq.... Help please!!
Ok, here's another question. If the switch is set to sequential and the PMS is set for twins...what happens when you flip the switch to non seq when each turbo is set for 12 lbs? It seems like you would have to go back in and reprogram the twin setting for lower boost on each turbo to get the same amount of boost as in seq.... Help please!!
Not a problem, the settings in the PMS for each turbo isn't setting a individual wastegate for each turbo, it is just changing the wastegates duty cycle at two different RPM bands. You may have to do some tweaking to get both working the way you want at first but it should be doable.
Wade
Thread
Thread Starter
Forum
Replies
Last Post
ls1swap
3rd Generation Specific (1993-2002)
17
06-03-24 03:25 PM
Snook
3rd Generation Specific (1993-2002)
17
02-27-21 02:54 PM