3rd Generation Specific (1993-2002) 1993-2002 Discussion including performance modifications and Technical Support Sections.
Sponsored by:

neverending coolant adding

Thread Tools
 
Search this Thread
 
Old 02-03-05, 10:45 AM
  #26  
Senior Member
Tenured Member 20 Years
iTrader: (11)
 
mecman's Avatar
 
Join Date: Jun 2001
Location: Chicago, IL, USA
Posts: 644
Received 17 Likes on 14 Posts
I have a similar problem. It started when I replaced the stock air separation tank with an aluminum one. It isn't coolant seals, I have great compression and no bubbles or residue in my coolant. What I notice is that I need to fill the coolant at the cap every other week. Meanwhile my overflow is totally full. Bottomline, it is not sucking back to the radiator when it cools down. Must be a sucking air from a bad hose lack of seal on the aluminum Air separation tank or coolant fill cap. I have replaced the fill cap but no change. I guess I need to pressure test the system.
Old 02-03-05, 10:56 AM
  #27  
Racecar - Formula 2000
Tenured Member 20 Years
 
DaveW's Avatar
 
Join Date: Sep 2002
Location: Bath, OH
Posts: 3,882
Received 292 Likes on 208 Posts
mecman,

Since what you changed just before the problem started was the AST, I would suspect a bad hose or connection between the AST and the overflow tank, or a bad seal of the AST cap outer seal to the AST, either of which would result in coolant not being drawn back to the engine.

As you said, ether of these would cause what you describe.

A pressure test may not help with the diagnosis, since, under pressure, the system is working as it should.

Last edited by DaveW; 02-03-05 at 11:06 AM.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Prediict
2nd Generation Specific (1986-1992)
32
11-18-15 08:41 AM
LongDuck
1st Generation Specific (1979-1985)
12
10-07-15 08:12 PM
musker
New Member RX-7 Technical
1
10-01-15 05:58 PM



Quick Reply: neverending coolant adding



All times are GMT -5. The time now is 12:25 PM.