Need some help with my FD =(
10-14-11 | 08:09 PM
#1
Need some help with my FD =(
Ok so i have had my fd for about a year i bought it from a complete idiot who ripped me off Ok so here is what i have done so far i have gotten a jdm engine replaced the old engine with a jdm one because i sent a turbine through my engine because the idiot decided to sell it to me with rusted turbos so i got jdm engine and turbos had it installed it was running amazing for once then all of a sudden one day a vacuum hose to my blow off snapped and i replaced it my turbos were spiking i had it set to 10 psi they were hitting around 11-12 and the car runs superrrr rich heres a video of what it sounds like and this is a first when i started it i let it sit for a while then all of a sudden i put my hand behind the pipe boom super moist but smells like water maybe it was rain water =/ but if the video doesn't give u enough of what u need tell me what to do ill record it and upload it asap heres the video i have as of right now
and please before you flame me for my punctuation and what not im very sorry
http://www.youtube.com/watch?v=KbYVVcCVuQw
BTW i don't know if this will help but here are the parts that were installed before i got the car i havent removed anything #
There are 2 sets of wheels, RPM usually displays 2 sets so there is actually 4 different rims
TSW Chrome Rears Staggert 19x9.5 with 2.75 lip 1 Jarama/ 1 Indy 500 wrapped with Nitto NT555 Extreme ZR 275 / 30/ ZR19's..., ...TSW Chrome fronts 18x8.0 1 inch lip 1 Jarama/ 1 Indy 500 wrapped with Nitto NT555 Extreme ZR 235/ 40/ ZR18's Hunter Road Force digitally balanced and Winn Align Tuner Digitally Wheel aligned $2700 installed, Cross drilled slotted rotors $250 front, $270 front, EBC Brake pads $40 front $40 rear, TEIN EDFC $253, TEIN Superstreet Coilovers with pillow ball upper mount $1540, Fender roll all four fenders $200, PIAA Extreme White Bulbs $80 with matching color parking light LED's $40See More
Stage 4 upgrades, Greddy Front Mount intercooler with piping $1200, Greddy Type RS Blowoff Valve $290, Greddy Intakes $249, Greddy 2 pipe kit with cast throttle elbow$190, Greddy Down pipe and mid pipe... $225, factory rubber motor mounts replaced with new urethane mounts $600 installed, all factory hoses replaced with new silicone hoses $300 installed, Greddy PRofec Bspec 2 $440, Greddy Turbo Timer $105, Apexi Power FC engine management $1000, AST air separator tank $150, Greddy pulley kit $125 and belt $35,Greddy oil catch can $95, RP competition fuel pump $265, Trust Titanium cat back exhaust (weights 6 pounds) $1595, Labor engine mods ($110 hour x 14) $1540, Autometer ES tachometer white letters that show red at night -exact as factory $260, Greddy boost gauge $80, Greddy Oil pressure gauge $200, 2 gauge A pillar $80, Exhaust Wrap wrap and installation $200
and please before you flame me for my punctuation and what not im very sorry
http://www.youtube.com/watch?v=KbYVVcCVuQw
BTW i don't know if this will help but here are the parts that were installed before i got the car i havent removed anything #
There are 2 sets of wheels, RPM usually displays 2 sets so there is actually 4 different rims
TSW Chrome Rears Staggert 19x9.5 with 2.75 lip 1 Jarama/ 1 Indy 500 wrapped with Nitto NT555 Extreme ZR 275 / 30/ ZR19's..., ...TSW Chrome fronts 18x8.0 1 inch lip 1 Jarama/ 1 Indy 500 wrapped with Nitto NT555 Extreme ZR 235/ 40/ ZR18's Hunter Road Force digitally balanced and Winn Align Tuner Digitally Wheel aligned $2700 installed, Cross drilled slotted rotors $250 front, $270 front, EBC Brake pads $40 front $40 rear, TEIN EDFC $253, TEIN Superstreet Coilovers with pillow ball upper mount $1540, Fender roll all four fenders $200, PIAA Extreme White Bulbs $80 with matching color parking light LED's $40See More
Stage 4 upgrades, Greddy Front Mount intercooler with piping $1200, Greddy Type RS Blowoff Valve $290, Greddy Intakes $249, Greddy 2 pipe kit with cast throttle elbow$190, Greddy Down pipe and mid pipe... $225, factory rubber motor mounts replaced with new urethane mounts $600 installed, all factory hoses replaced with new silicone hoses $300 installed, Greddy PRofec Bspec 2 $440, Greddy Turbo Timer $105, Apexi Power FC engine management $1000, AST air separator tank $150, Greddy pulley kit $125 and belt $35,Greddy oil catch can $95, RP competition fuel pump $265, Trust Titanium cat back exhaust (weights 6 pounds) $1595, Labor engine mods ($110 hour x 14) $1540, Autometer ES tachometer white letters that show red at night -exact as factory $260, Greddy boost gauge $80, Greddy Oil pressure gauge $200, 2 gauge A pillar $80, Exhaust Wrap wrap and installation $200
Last edited by BillyMitheRxGuy; 10-14-11 at 08:30 PM.
10-14-11 | 09:11 PM
#2
Has it ever been tuned? It sounds like it's running on one rotor.
Go to the regional section and meet up with some of our richmond contingent. There are quite a few richmond area fd owners.
Go to the regional section and meet up with some of our richmond contingent. There are quite a few richmond area fd owners.
Trending Topics
10-15-11 | 03:08 AM
#8
If it's coolant it will have a very distinct sweet smell. Also, the liquid coming out will be very slimy. Sounds like the bov couldn't release the build up pressure when the throttle was closed maybe causing damage to the turbos. Either way, it's time for a compression check to see if your engine is ok.
