Motor Rebuild!!!!
10-23-02, 01:50 PM
#1
Full Member
Thread Starter
Join Date: May 2002
Location: Connecticut
Posts: 128
Likes: 0
Received 0 Likes
on
0 Posts
Motor Rebuild!!!!
Ok, I need my motor rebuilt and I've been doing my research as to where the best place to rebuild it would be. So far I'm leaning towards pineapple. What other places or suggestions do you guys have? Also keep in mind that I live in Connecticut and shipping the motor is expensive so a nearby place is preferable. thanx guys...
10-23-02, 02:25 PM
#3
I am also rebuilding my motor and some one recomended putting in the old style side seals from the rx3 with 3mm apex seals, they said they are more reliable than the new plastit ones is this true? I saw the ones from my 93 motor when it was taken apart and they were melted. I plan on running a large single turbo. I have heard teh old side seals lose a bit of compression when the motor is first started but thats it, is this a concern and if so why?
10-23-02, 04:19 PM
#5
Rotary Enthusiast
Join Date: Feb 2001
Location: Calgary, Alberta, Canada
Posts: 809
Likes: 0
Received 0 Likes
on
0 Posts
Thread
Thread Starter
Forum
Replies
Last Post