Lots of backfiring and some "hesitation"?
06-12-03, 10:14 PM
#1
The Cursed FD
Thread Starter
Join Date: Nov 2001
Location: CA
Posts: 914
Likes: 0
Received 0 Likes
on
0 Posts
Lots of backfiring and some "hesitation"?
I just got my rebuild done with a Mazda Re-man. I put 500 miles on it without going over 3k rpms the whole time. Well I took it out to open her up and at higher rpms (5000-6500) it feels like it is holding back and backfires a lot on accel and decel. Anyone ever had this problem? Thanks for the help.
06-12-03, 10:45 PM
#2
Banned. I got OWNED!!!
Join Date: Apr 2003
Location: Orange County
Posts: 13
Likes: 0
Received 0 Likes
on
0 Posts
Check your pressure sensor. Make sure that it is tight. Obviously, when you hit 5000-6500 boost is higher causing the silicon hose at the pressure sensor loose.
The pressure sensor is located in the engine bay on the driver side near the intake elbow.
Good luck!
The pressure sensor is located in the engine bay on the driver side near the intake elbow.
Good luck!
Thread
Thread Starter
Forum
Replies
Last Post
Jeff20B
1st Generation Specific (1979-1985)
73
09-16-18 07:16 PM