just dyno'ed my FD 30 mins ago
Trending Topics
#9
Full Member
Thread Starter
Join Date: Apr 2002
Location: raleigh, nc
Posts: 176
Likes: 0
Received 0 Likes
on
0 Posts
my mods are as follows-
downpipe, midpipe, custom fabricated free flowing catalytic converter, cat back exhaust, hardpipe kit, greddy BOV, power intake and a s-afc. I have to scan the dyno sheet so it will be on later tonite. I was boosting 8.5, 11, 8.5. I would occasionally spike up to 13. If anyone tries to talk you out of an s-afc because they suck dont listen to them. I didnt have the money to spend on an FC commander so I went with the AFC. I bought it and installed it on the dyno-I had close to a 50!!! rear wheel horsepower gain just from the s-afc. My dyno sheet should reflect this becasue I ran a base run before auctaully tuning the afc and out popped 50 RW horses! Funny thing happened on the dyno, we had a peice of 2x4 to hold in the air flow sensor from the dyno in my exhaust and my rex definatly caught in on fire during one of my runs (it was pretty funny but smelled horribly and stung your eyes). Anyways- dyno sheet will be online sometime soon. Sorry about not listing mods-I was to excited and had to run to class because the dyno took to long.
downpipe, midpipe, custom fabricated free flowing catalytic converter, cat back exhaust, hardpipe kit, greddy BOV, power intake and a s-afc. I have to scan the dyno sheet so it will be on later tonite. I was boosting 8.5, 11, 8.5. I would occasionally spike up to 13. If anyone tries to talk you out of an s-afc because they suck dont listen to them. I didnt have the money to spend on an FC commander so I went with the AFC. I bought it and installed it on the dyno-I had close to a 50!!! rear wheel horsepower gain just from the s-afc. My dyno sheet should reflect this becasue I ran a base run before auctaully tuning the afc and out popped 50 RW horses! Funny thing happened on the dyno, we had a peice of 2x4 to hold in the air flow sensor from the dyno in my exhaust and my rex definatly caught in on fire during one of my runs (it was pretty funny but smelled horribly and stung your eyes). Anyways- dyno sheet will be online sometime soon. Sorry about not listing mods-I was to excited and had to run to class because the dyno took to long.
#10
Lives on the Forum
Join Date: Dec 2001
Location: San Lorenzo, California
Posts: 14,716
Likes: 0
Received 8 Likes
on
8 Posts
Re: just dyno'ed my FD 30 mins ago
Originally posted by sanfordman
297 rwhp, 235 lb/ft-thats quality
297 rwhp, 235 lb/ft-thats quality
#14
close to 300rwhp is very impressive on 8.5psi!?!? I figure the spike to 13psi was during transision or what was going on? What was your A/F then?? 300rwhp at 8.5 makes me go WOW as much as rikki's 350rwhp at 11psi
Danny
Danny
#15
Full Member
Join Date: Mar 2002
Location: SoCal, San Diego
Posts: 115
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by ROTARYFDTT
you said you had both a midpipe and a custom cat. I was just wondering which one you have because a MP takes the place of a catalytic converter.
you said you had both a midpipe and a custom cat. I was just wondering which one you have because a MP takes the place of a catalytic converter.
#16
Rotary Enthusiast
iTrader: (1)
Originally posted by sanfordman
If anyone tries to talk you out of an s-afc because they suck dont listen to them. I didnt have the money to spend on an FC commander so I went with the AFC. I bought it and installed it on the dyno-I had close to a 50!!! rear wheel horsepower gain just from the s-afc.
If anyone tries to talk you out of an s-afc because they suck dont listen to them. I didnt have the money to spend on an FC commander so I went with the AFC. I bought it and installed it on the dyno-I had close to a 50!!! rear wheel horsepower gain just from the s-afc.
Matt
#18
Ding King
iTrader: (4)
Originally posted by Mahjik
He probably means he bought a midpipe and had a custom cat welded into place.
He probably means he bought a midpipe and had a custom cat welded into place.
#19
Mr. Links
iTrader: (1)
Originally posted by ROTARYFDTT
WORD......that doesn't make any sense, either I am stupid but I don't see the point in that. Why would you buy a MP and then put in a high flow cat, why not just buy the high flow cat? Unless I am missing something, in which case could you explain what you mean.
WORD......that doesn't make any sense, either I am stupid but I don't see the point in that. Why would you buy a MP and then put in a high flow cat, why not just buy the high flow cat? Unless I am missing something, in which case could you explain what you mean.
#20
well, in reality if you buy a midpipe and put a highflow cat in from say a muffler shop, it would be cheaper than actually buying an FD specific highflow. And I agree that you can not make 50rwhp from just tuning the SAFC.
Danny
Danny
#22
going ls
Join Date: Jan 2002
Location: South Florida
Posts: 602
Likes: 0
Received 0 Likes
on
0 Posts
well i dont think that he made 50 hp from the s-afc itself, but if he was running rich enough before, i think leaning it out a bit could get quite a gain, dont you think? I have the S-AFC, but i avent installed it yet. Im waiting untill i break in the clutch to put it on.
#23
Senior Member
Join Date: Oct 2001
Location: Minnesota, now in FL and I dont think I'm goin back
Posts: 443
Likes: 0
Received 0 Likes
on
0 Posts
this guy is sayin some weird *** ****, like custom cat w/ a MP. How the hell do u do that??? Oh and the AFC gains 50 HP, just like neon lights do right=-)
#24
Rotary Freak
Join Date: Jan 2002
Location: l.a.
Posts: 1,640
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by Quik 93 FD
well i dont think that he made 50 hp from the s-afc itself, but if he was running rich enough before, i think leaning it out a bit could get quite a gain, dont you think? I have the S-AFC, but i avent installed it yet. Im waiting untill i break in the clutch to put it on.
well i dont think that he made 50 hp from the s-afc itself, but if he was running rich enough before, i think leaning it out a bit could get quite a gain, dont you think? I have the S-AFC, but i avent installed it yet. Im waiting untill i break in the clutch to put it on.
#25
I'm a CF and poop smith
Gees let the guy respond, he has only posted 2 post and some of you guys are jumping all over him.
Personnaly I have a Super AFC and I had to lower my injector duty cycle about 10% all the way across the rpm range just to get to about 10.5:1 afr, the lower limits of the afr gauge. Eventually I went as low as -15% to get to about 11:1 afr. I did pick up a bit of hp but not that much.
On another note, I would like to see his afr
Personnaly I have a Super AFC and I had to lower my injector duty cycle about 10% all the way across the rpm range just to get to about 10.5:1 afr, the lower limits of the afr gauge. Eventually I went as low as -15% to get to about 11:1 afr. I did pick up a bit of hp but not that much.
On another note, I would like to see his afr
Last edited by skunks; 08-28-02 at 06:15 PM.