Jspec X05 wires to USDM X05 connectors
06-17-11 | 01:40 PM
#1
Thread Starter
Junior Member
Joined: May 2011
Posts: 17
Likes: 0
From: Washington
Jspec X05 wires to USDM X05 connectors
Sup guys. Here is my situation, Im installing a Jspec engine and 5speed transmission on my AT USDM car. I have looked thru all of the write ups on this forum and others but I was unable to find what I needed. I finished wiring X14 just fine but X05 is giving me a problem. What I need is to use the X05 wires from the Jspec harness and put a USDM X05 connector so my install will be plug and play. unfortunately I dont have a japanese manual so I cant just rewire it like I did for the X14. Is there anybody out there that can help me with this?
Thanks in advance!
Thanks in advance!
06-19-11 | 10:13 PM
#4
Thread Starter
Junior Member
Joined: May 2011
Posts: 17
Likes: 0
From: Washington
Yah!!!! all i need to know is which wires i need to match for the jspec x05 to the usdm x05 harness. for example jspec R/B wire goes to ?? on usdm harness. If you can do that it would be a big help. Thanks in advance!!!!
Last edited by biomedtech12; 06-19-11 at 10:24 PM.
06-20-11 | 09:17 PM
#5
X05 1 brown/black to Engine Harness brown/black.
X05 2 black N/U
X05 3 red/yellow (14) jump to X05 5 blue/yellow(14)clutch interlock
X05 4 black/white (14) EH black/white
X05 5 blue/yellow (14) to X05 3 red/yellow(14)
X05 6 black/yellow (14) EH black/yellow
X05 7 black/green (14) EH black green
X05 8 green to EH yellow
X05 9 brown N/U
X05 10 yellow/red N/U
X05 11 blue/black to EH blue/black
X05 12 white/blue to EH blue/black
X05 13 brown/white to EH brown/white
X05 14 Black to EH black
X05 15 green/white to clutch switch (run a wire to the switch-other side to ground)
X05 16 red/white N/U
X05 17 green/red N/U
X05 18 green/yellow N/U
X05 19 blue/green N/U
X05 20 Yellow to EH red
X05 21 blue N/U
There was a wire on the US car that went to X14 that goes to X05 on the JDM. My memory is that it was brown/white. Anyway, you should have a brown/white wire on X14 that doesn't go anywhere and the X05 will be like I listed.
Dave
Questions? 775-843-7032
X05 2 black N/U
X05 3 red/yellow (14) jump to X05 5 blue/yellow(14)clutch interlock
X05 4 black/white (14) EH black/white
X05 5 blue/yellow (14) to X05 3 red/yellow(14)
X05 6 black/yellow (14) EH black/yellow
X05 7 black/green (14) EH black green
X05 8 green to EH yellow
X05 9 brown N/U
X05 10 yellow/red N/U
X05 11 blue/black to EH blue/black
X05 12 white/blue to EH blue/black
X05 13 brown/white to EH brown/white
X05 14 Black to EH black
X05 15 green/white to clutch switch (run a wire to the switch-other side to ground)
X05 16 red/white N/U
X05 17 green/red N/U
X05 18 green/yellow N/U
X05 19 blue/green N/U
X05 20 Yellow to EH red
X05 21 blue N/U
There was a wire on the US car that went to X14 that goes to X05 on the JDM. My memory is that it was brown/white. Anyway, you should have a brown/white wire on X14 that doesn't go anywhere and the X05 will be like I listed.
Dave
Questions? 775-843-7032
Thread
Thread Starter
Forum
Replies
Last Post
toplessFC3Sman
2nd Generation Specific (1986-1992)
6
03-20-18 02:54 PM
