If you had $60k what would you buy? An FD or....?
#1
If you had $60k what would you buy? An FD or....?
So the FD is now 20 years old.
In 1993, its MSRP was approximately $35,000. As it turns out, that is about $60,000 of today's dollars.
So here's the question to the folks on this forum. If you had 60k today, would you buy...
1) a 21st century FD (rotary, turbocharged, a tranny that can support the power, a 21st century suspension, a current mazda interior gussied up for the 7, etc)
2) <insert your car here>
The only rules are the car you choose would be owned in place of a NEW 2 seater sports car (if thats your beater, you have to buy a beater. If you buy a new 2 seater to be a garage queen, that applies to you).
DISCUSS!!
In 1993, its MSRP was approximately $35,000. As it turns out, that is about $60,000 of today's dollars.
So here's the question to the folks on this forum. If you had 60k today, would you buy...
1) a 21st century FD (rotary, turbocharged, a tranny that can support the power, a 21st century suspension, a current mazda interior gussied up for the 7, etc)
2) <insert your car here>
The only rules are the car you choose would be owned in place of a NEW 2 seater sports car (if thats your beater, you have to buy a beater. If you buy a new 2 seater to be a garage queen, that applies to you).
DISCUSS!!
#3
Eats, Sleeps, Dreams Rotary
iTrader: (52)
For me it's FD all the way. It is and will always be my dream car.
Buying a new "go fast" toy for me, would not be as satisfying. Ironically, the FD's being 20 years old and still pulling off its capability is part of the appeal. This hobby extends far beyond driving a cool car. I enjoy modifying, upgrading, and restoring my car almost as much as driving it.... almost. .
As far as the rotary goes, it's just a damn cool little engine. I think no one will argue the fact that it is an enthusiasts engine. But like the small sleek chassis it sits in, there is really nothing quite like it.
Buying a new "go fast" toy for me, would not be as satisfying. Ironically, the FD's being 20 years old and still pulling off its capability is part of the appeal. This hobby extends far beyond driving a cool car. I enjoy modifying, upgrading, and restoring my car almost as much as driving it.... almost. .
As far as the rotary goes, it's just a damn cool little engine. I think no one will argue the fact that it is an enthusiasts engine. But like the small sleek chassis it sits in, there is really nothing quite like it.
#6
Registered User
iTrader: (61)
Ehh, IMO the FD is of great value and certainly hard to beat under $20,000. Without putting it on a pedestal, which most of you will anyway, it certainly has its downfalls.
For me I would pickup a Viper GTS (no surprise to anyone who knows me and I am actively in the market for a black one), one of the earlier years with forged internals for $35K, send it to RSI for their twin turbo kit that runs an additional $12K. For $47k, I have a 900whp Viper with the ease of breaking 1000+whp. Also, I find a lowered Viper with a nice set of wheels more aesthetically pleasing to the eyes than the FD.
Just my .02
For me I would pickup a Viper GTS (no surprise to anyone who knows me and I am actively in the market for a black one), one of the earlier years with forged internals for $35K, send it to RSI for their twin turbo kit that runs an additional $12K. For $47k, I have a 900whp Viper with the ease of breaking 1000+whp. Also, I find a lowered Viper with a nice set of wheels more aesthetically pleasing to the eyes than the FD.
Just my .02
Trending Topics
#8
Eats, Sleeps, Dreams Rotary
iTrader: (52)
Ehh, IMO the FD is of great value and certainly hard to beat under $20,000. Without putting it on a pedestal, which most of you will anyway, it certainly has its downfalls.
For me I would pickup a Viper GTS (no surprise to anyone who knows me and I am actively in the market for a black one), one of the earlier years with forged internals for $35K, send it to RSI for their twin turbo kit that runs an additional $12K. For $47k, I have a 900whp Viper with the ease of breaking 1000+whp. Also, I find a lowered Viper with a nice set of wheels more aesthetically pleasing to the eyes than the FD.
Just my .02
For me I would pickup a Viper GTS (no surprise to anyone who knows me and I am actively in the market for a black one), one of the earlier years with forged internals for $35K, send it to RSI for their twin turbo kit that runs an additional $12K. For $47k, I have a 900whp Viper with the ease of breaking 1000+whp. Also, I find a lowered Viper with a nice set of wheels more aesthetically pleasing to the eyes than the FD.
Just my .02
Those older body style Vipers do look great!
I guess if I had to go another direction a built Lotus Exige would be pretty ripping.... I've seen a few nice examples.
#13
I had 2 dream cars growing up... and FD & a Viper (shocking - they look so similar if you like one you have to love the other even though they are obviously different in every way).
I think i'd go the Viper route too - Rich knows this as I was about to pull the trigger on a 96 GTS (Blue/White) - which is the true iconic color combo for that car.
Either that or something exotic like a used Aston Martin Vantage (those can be had for almost 60k now ).
Some eye candy for the thread:
I think i'd go the Viper route too - Rich knows this as I was about to pull the trigger on a 96 GTS (Blue/White) - which is the true iconic color combo for that car.
Either that or something exotic like a used Aston Martin Vantage (those can be had for almost 60k now ).
Some eye candy for the thread:
#18
Rotary Freak
A lot of new cars fail to excite me. A modified Ferrari 360 Modena with a manual transmission is more my style...
#21
I misread. Yes, I'd definitely consider it. Depends on what "21st Century Bells and Whistles" means. I'd like it to be a very pure care the way the FD is/was, brought up to modern performance standards (legally and reliably). I don't give a hang about iDrive or whatever, or mirrors that re-aim themselves when I back up, or, ahem, 4 doors.
I say that because, for $60k, I don't see anyone building that car except for maybe a C6Z (Which is actually still more $$), which I don't really want. What I want is the lovechild of a C6Z and an Exige, with rotary power for $60k. I'd buy that.
#22
Like the FD, styling would have to be captivating and timeless. Funny, I was heading with a friend to a local car show last Saturday in separate cars. When we arrived, he said "hey, I'm not sure if you're aware of this, but people are constantly slowing down or speeding up on the road to check out your car." Pretty incredible for a ride that's more than 20 years old.
I'm also not as tied to a HP number as I am to a lightweight well-balanced setup that's tossable with lots of feel and feedback through the steering rack. I continue to be amazed by most rotary-owners obsession with HP numbers. It needs to be adequate but not "xyz or else the car's crap" IMO. I doubt if you see tons of posts on the Exige forums about their cars being underpowered. Mazda just needs to get their next generation rotary HP story straight well in advance of marketing the vehicle and error on the side of being conservative.
Undercommit and overdeliver
I'm also not as tied to a HP number as I am to a lightweight well-balanced setup that's tossable with lots of feel and feedback through the steering rack. I continue to be amazed by most rotary-owners obsession with HP numbers. It needs to be adequate but not "xyz or else the car's crap" IMO. I doubt if you see tons of posts on the Exige forums about their cars being underpowered. Mazda just needs to get their next generation rotary HP story straight well in advance of marketing the vehicle and error on the side of being conservative.
Undercommit and overdeliver
#23
I'm also not as tied to a HP number as I am to a lightweight well-balanced setup that's tossable with lots of feel and feedback through the steering rack. I continue to be amazed by most rotary-owners obsession with HP numbers. It needs to be adequate but not "xyz or else the car's crap" IMO. I doubt if you see tons of posts on the Exige forums about their cars being underpowered.
So I'm curious at what you would consider adequate?
#25
Lives on the Forum
iTrader: (83)
If Mazda came out with a sportscar like a rotary Exige, I'd consider that a real successor to the FD and I would ****** it up in a heartbeat even if it only had 350rwhp. I'd probably leave it stock and call it a day. I hate threads like these. Nothing like that will ever happen. When Lotus finally kills their super lightweight cars, you know it's the end of days.