How to replace fuel filter
03-28-08 | 01:53 PM
#27
04-18-08 | 01:22 PM
#29
Why not just buy the correct FD filter? They are not expensive.
Sorry if my previous comment confused you, I have installed a fuel filter in a 2001 miata and I recall it being 'similar' in size and shape to the FD filter. I would not recommend using a miata filter on your FD unless you have no other choice and you have verified that the size of the filter and the inlet/outlet lines are comparable to the FD's.
Sorry if my previous comment confused you, I have installed a fuel filter in a 2001 miata and I recall it being 'similar' in size and shape to the FD filter. I would not recommend using a miata filter on your FD unless you have no other choice and you have verified that the size of the filter and the inlet/outlet lines are comparable to the FD's.
04-18-08 | 02:19 PM
#30
Why not just buy the correct FD filter? They are not expensive.
Sorry if my previous comment confused you, I have installed a fuel filter in a 2001 miata and I recall it being 'similar' in size and shape to the FD filter. I would not recommend using a miata filter on your FD unless you have no other choice and you have verified that the size of the filter and the inlet/outlet lines are comparable to the FD's.
Sorry if my previous comment confused you, I have installed a fuel filter in a 2001 miata and I recall it being 'similar' in size and shape to the FD filter. I would not recommend using a miata filter on your FD unless you have no other choice and you have verified that the size of the filter and the inlet/outlet lines are comparable to the FD's.
FD: N3A1-20-490
Miata: BP4W-20-490B
04-19-08 | 02:38 PM
#31
Manly
Joined: Mar 2008
Posts: 146
Likes: 0
From: Toms River, NJ
Why not just buy the correct FD filter? They are not expensive.
Sorry if my previous comment confused you, I have installed a fuel filter in a 2001 miata and I recall it being 'similar' in size and shape to the FD filter. I would not recommend using a miata filter on your FD unless you have no other choice and you have verified that the size of the filter and the inlet/outlet lines are comparable to the FD's.
Sorry if my previous comment confused you, I have installed a fuel filter in a 2001 miata and I recall it being 'similar' in size and shape to the FD filter. I would not recommend using a miata filter on your FD unless you have no other choice and you have verified that the size of the filter and the inlet/outlet lines are comparable to the FD's.
05-11-08 | 10:19 PM
#32
Thread Starter
~Insane Burnout
Joined: Mar 2008
Posts: 259
Likes: 0
From: Off the grid
Fuel Filter Replacement...It's Done!!
I finally replaced the fuel filter, what a bear it was removing it!! I used a handi little hose pinch pliers to pinch the fuel hoses and they did not leak at all. The worst part was removing the existing hose clamps and removing the hoses from the old filter. The reverse prosses was a snap it took about 20 minutes to re-install the new filter. The removal took about 2 hours, scarred and cut hands and forearms, etc. But it's finally DONE!!
06-14-16 | 03:00 PM
#34
06-14-16 | 05:49 PM
#35
A couple more I found with pictures....
https://www.rx7club.com/3rd-generati...cation-616397/
https://www.rx7club.com/3rd-generati...ce-put-576820/
https://www.rx7club.com/3rd-generati...cation-616397/
https://www.rx7club.com/3rd-generati...ce-put-576820/
06-15-16 | 12:00 AM
#36
10-8-10-8
Joined: Jan 2012
Posts: 845
Likes: 10
From: Australia
Just to add to this one,
I used to own a 2001 BMW M5 V8 sedan. The fuel filter in these is a really nice 8 inch long (approx.) canister with the same sized barb ends as the FD filter. Its an extremely high quality BMW filter with more filter media surface area and the external canister is even polished looking alloy. They are German and made for severe service duty and yet cheaper than the FD stock filter.
I'm going to relocate my filter and use one of these beauties when I do.
I used to own a 2001 BMW M5 V8 sedan. The fuel filter in these is a really nice 8 inch long (approx.) canister with the same sized barb ends as the FD filter. Its an extremely high quality BMW filter with more filter media surface area and the external canister is even polished looking alloy. They are German and made for severe service duty and yet cheaper than the FD stock filter.
I'm going to relocate my filter and use one of these beauties when I do.
Thread
Thread Starter
Forum
Replies
Last Post
