FD3Sky

I recently bought an hks ssq bov kit for my car and it didnt come w/ instructions and i have no idea how to install it. I already searched all the threads about this bov and i still couldnt figure it out. I know where the stock bov is and where everything is but i just don't see how the new hks bov would fit. Everyone keeps saying it just fits right in, in place of the stock bov but i just cant figure out how. Also is the bov suppose to have a metal pipe attached to it? Because i dont know how it fits. Here are some pics of the hks bov.


Help would be greatly appreciated. I searched for an hour looking for installation tips and i spent another hr trying to fit it in. Sorry if im being a newb right now.

FD3Sky

o yea and this is the right kit right? Cuz when i looked up specfic hks ssq bov kits again for an rx7, they looked different. iduno.

Quickfini

iTrader: (6)

Hmm it doesn't look like it's made for the FD's stock bov position, nor does it look like it'll mate to the Greddy elbow.

You might have to take the bov off the flange to make use of it.

FD3Sky

hmm do u think it goes where the main intake piping is

AMRAAM4

Not suppose to have a pipe attached to it. It goes in the same place as the stocker, minus the hose continuing off the front of it to the airbox.

FD3Sky

o really damn does anyone know what car this kit is made for? Or maybe this isnt meant to fit a stock FD.

93FD3S

Looks like its maybe from FD with a FM IC.

TwoTwinTurbos

Yeah my SSQV definately did not come with a pipe on it.

TheGermy

mine didn't either i think you got a completly different kit...my kit connects to the y-pipe

Germ

FD3Sky

hey does anyone know what other parts i need if i take off the bov from the pipe to fit it into my stock fd. Like what do i need to purchase inorder to fit it in w/out the pipe.

FD3Sky

another thing, does anyone have a picture of what the kit should look like?

kchan

well the bov could be placed in two positions. one is at its stock location and the other is somewhere between the intercooler and the throttle body. It seems like the bov is already welded on a pipe that should fit somewhere between the throttle body and intercooler. If you want to install your bov in the stock location, you need to remove the bov from the pipe and buy an adaptor kit. i believe everything i said is correct, if not someone please correct me.

7 BOUND

mind didnt either could it be for a FC

buzzer

this is what you need (pic below) im selling it so shoot me a pm if your interested. the o ring and the c clip does not come with it though.

jic

iTrader: (1)

did you buy it off some dude on craigslist?

Blizare

If you know what a BOV does than it should be no problem to understand where to put it.

imo.

jic

iTrader: (1)

yupp

FD3Sky

yea i got it off craigslist

MazdaSpeed93

That pipe doesnt look like it would mate in between the ic or the throttle body. To me it looks like they gave a pipe that would replace the rubber hose that connects the bov to the manifold and the stock air box but that also doesnt make sense cause its a metal pipe. Just get a greddy elbow with the correct flange and mount it on the elbow, case closed.

Sawish93

[IMG]http://cgi.ebay.com/ebaymotors/Mazda-RX7_W0QQitemZ4569025573QQcategoryZ6327QQrdZ1QQcmdZ ViewItem[/IMG

hey man go ahead and check this out. it looks as if it is the same set up.. i aint sure, but it looks like.

Sawish93

haha sorrie take out the stupid [IMG] whatever crap


http://cgi.ebay.com/ebaymotors/Mazda...QQcmdZViewItem

Sawish93

can you tell me how she sounds, cuz i am also looking for a BOV but no one wants to help me.

TwinTriangles

That pipe is for the greddy fmic it goes in between the greddy elbow and the lower intercooler pipe. I have mine setup in the exact same place heres a pic of my setup
If you want it in the stock loacation you have to get that flange that buzzer has posted above.

FD3Sky

oo ic thanks for the help