HELP!! Strange throttle issue after new turbos!!!
#1
92' JDM Type R
![](https://www.rx7club.com/images/misc/05_year_icon.png)
Thread Starter
iTrader: (1)
Join Date: Nov 2006
Location: Vernon BC/Winnipeg MB Canada
Posts: 482
Likes: 0
Received 0 Likes
on
0 Posts
HELP!! Strange throttle issue after new turbos!!!
Ok i put in new turbos, and did a tune-up, and now when I start the car it idles at 2K rpm!, when I throttle it the throttle seems to stick so the engine will just stay at whatever rpm I shifted in! When I tried WOT, it would shoot towards the redline untill i put it in gear!!!
info I dont know what the hell!!!
thanks!
info I dont know what the hell!!!
thanks!
#2
Racecar - Formula 2000
![](/images/misc/20_year_icon.png)
Check your throttle cable/linkage. You probably kinked the cable or bent something while installing the turbos.
#3
92' JDM Type R
![](https://www.rx7club.com/images/misc/05_year_icon.png)
Thread Starter
iTrader: (1)
Join Date: Nov 2006
Location: Vernon BC/Winnipeg MB Canada
Posts: 482
Likes: 0
Received 0 Likes
on
0 Posts
the throttle cable is loose... there is play in it...
Im being told to check and see if the throttle body is sticking... ill check ASAP!
any other ideas guys?
Im being told to check and see if the throttle body is sticking... ill check ASAP!
any other ideas guys?
#5
Racing Mechanic
![](/images/misc/20_year_icon.png)
Check the Idle motor , clean it!!!
if you put 1st then realease the cluth slowly , the rpms stay in 1200? or less?
Doble check that, is very easy to take it off but take care of the gasket.
if you put 1st then realease the cluth slowly , the rpms stay in 1200? or less?
Doble check that, is very easy to take it off but take care of the gasket.
Thread
Thread Starter
Forum
Replies
Last Post
trickster
2nd Generation Specific (1986-1992)
25
07-01-23 04:40 PM
CaptainKRM
2nd Generation Specific (1986-1992)
14
08-26-15 09:52 PM