Help!!!!!!
08-09-06, 11:55 PM
#26
Originally Posted by dgeesaman
The FAQ covers frequently asked questions only. Many people simply remove the secondary air system as the first sign of trouble. If you intend to keep it, at least that means replacement used parts are very easy to find.
If you haven't searched for "split air" or "code 30*" (the star makes a two character term into a 3 character term) or similar, you should pursue that.
But most of all, it's time to refer to the Factory Service Manual and follow the procedure specified for code 30.
Dave
If you haven't searched for "split air" or "code 30*" (the star makes a two character term into a 3 character term) or similar, you should pursue that.
But most of all, it's time to refer to the Factory Service Manual and follow the procedure specified for code 30.
Dave
08-10-06, 12:15 PM
#27
Originally Posted by scotty305
...
There is a huge troubleshooting section in the factory workshop manual. There is a sticky post at the top of the 3rd Gen section where you can download a copy.
...
There is a huge troubleshooting section in the factory workshop manual. There is a sticky post at the top of the 3rd Gen section where you can download a copy.
...
Perhaps you don't understand how valuable the FSM is. The factory service manual is worth over $100 if you want to buy a copy from Mazda. It was written by the people who designed the car. A few charitable forum members spent countless hours scanning their manuals so we can all use them. It's the single most valuable piece of information on these forums.
Since your problem seems to be ignition-related (changing spark plugs & wires helped), then it's probably a misfire. Most misfire issues will keep the car from making power at high RPM's. Ignition problems will feel quick, jerky, and violent (as opposed to fuel or air problems, which are a relatively smooth and soft loss of power). Check page G-6 of the Workshop Manual, it's pg. 431 of the PDF.
For your Split Air Solenoid problem (code 30), the page you're looking for is F-23 of the Workshop Manual, it's pg. 211 of the PDF. There are also other parts of the Fuel & Emission Control Systems that discuss the split air solenoid, so read around and you'll find them.
Good luck,
-s-
Last edited by scotty305; 08-10-06 at 12:17 PM.
08-10-06, 02:49 PM
#28
Originally Posted by scotty305
I posted that advice 7/24/06 , which was over 2 weeks ago. If you had started reading the FSM then, you probably would have solved your problem by now.
Perhaps you don't understand how valuable the FSM is. The factory service manual is worth over $100 if you want to buy a copy from Mazda. It was written by the people who designed the car. A few charitable forum members spent countless hours scanning their manuals so we can all use them. It's the single most valuable piece of information on these forums.
Since your problem seems to be ignition-related (changing spark plugs & wires helped), then it's probably a misfire. Most misfire issues will keep the car from making power at high RPM's. Ignition problems will feel quick, jerky, and violent (as opposed to fuel or air problems, which are a relatively smooth and soft loss of power). Check page G-6 of the Workshop Manual, it's pg. 431 of the PDF.
For your Split Air Solenoid problem (code 30), the page you're looking for is F-23 of the Workshop Manual, it's pg. 211 of the PDF. There are also other parts of the Fuel & Emission Control Systems that discuss the split air solenoid, so read around and you'll find them.
Good luck,
-s-
Perhaps you don't understand how valuable the FSM is. The factory service manual is worth over $100 if you want to buy a copy from Mazda. It was written by the people who designed the car. A few charitable forum members spent countless hours scanning their manuals so we can all use them. It's the single most valuable piece of information on these forums.
Since your problem seems to be ignition-related (changing spark plugs & wires helped), then it's probably a misfire. Most misfire issues will keep the car from making power at high RPM's. Ignition problems will feel quick, jerky, and violent (as opposed to fuel or air problems, which are a relatively smooth and soft loss of power). Check page G-6 of the Workshop Manual, it's pg. 431 of the PDF.
For your Split Air Solenoid problem (code 30), the page you're looking for is F-23 of the Workshop Manual, it's pg. 211 of the PDF. There are also other parts of the Fuel & Emission Control Systems that discuss the split air solenoid, so read around and you'll find them.
Good luck,
-s-
Thanks, I've read it after i figured my problem. But like i mentioned earlier, in the thread, i only get to see my car on the weekend and can probably work on it for less than few hours. Once again thanks for the info and I do appreciated.
-Eric
