Hatch Carpet Gap Driving Me Crazy
#1
Hatch Carpet Gap Driving Me Crazy
Unfortunately there are not many FDs where I live and simply looking at others is just not that easy for me, so here I am. This is a very small issue however it has been driving me crazy for a few years now. I’m 99 percent sure everything is put together correctly/ fully seated as far as rear hatch plastics go, and that the hatch carpet is factory. It’s a stock non bose car.
I can easily see in between down to the spare tire cover (no spare tire in car, of which I just now realized may be something). It’s like the carpet it too short to actually reach the back and the little 90* lip on the plastic is too high. Idk but the carpet sags down and exposes the gray cover, looking like garbage.
Is there something missing or am I crazy?
I can easily see in between down to the spare tire cover (no spare tire in car, of which I just now realized may be something). It’s like the carpet it too short to actually reach the back and the little 90* lip on the plastic is too high. Idk but the carpet sags down and exposes the gray cover, looking like garbage.
Is there something missing or am I crazy?
#2
You might be able to build up the backing of the end piece to bring it closer to the carpet. Mindyou, each time you remove the end piece you risk breaking a tab. Good news you can get new end pieces for about $200 from Mazda.
Also you can get an second overlay carpet, that are OEM correct as they were a shop option. OEM OEM are expensive but there are a number of replicas available, that you can even order with the "RX7" stitched logo.
I got mine from Gira777 on ebay.
Also you can get an second overlay carpet, that are OEM correct as they were a shop option. OEM OEM are expensive but there are a number of replicas available, that you can even order with the "RX7" stitched logo.
I got mine from Gira777 on ebay.
#4
Seller on YAJ represented that the below was an original Spirit R carpet. If so it should normally have got bid much higher. We had to look very closely at the underside of the logo stitching to compare to the genuine article. Conclusion was, it was hard to tell.
Last edited by Redbul; 06-29-24 at 01:40 PM.
#5
I think your fitment is normal OP….at least compared to mine (R model so no BOSE). And I’ve never had a reason to remove and reinstall. It also bugged me too, so some years ago I bought an over-lay carpet mat from Garage Alpha. I think I read somewhere here they struggling after the Covid years and their site has them listed with a 4-6 week delivery as they’re made to order…with border and color choices. But I’ll attest to the excellent quality and fitment of the mat. I’ve also bought other stuff from them (including matching floor mats) and always been happy.
Last edited by Sgtblue; 06-29-24 at 02:19 PM.
#6
Yeah I’ve always been happy with the GarageAlpha stuff. I never knew that was an overlay mat, I always just thought they were meant to swap with the OEM mat.
With the GarageAlpha mat laying overtop the stock, it reaches all the way to the back and covers up that gap?
With the GarageAlpha mat laying overtop the stock, it reaches all the way to the back and covers up that gap?
Trending Topics
The following users liked this post:
tgaffner (06-29-24)
The following 4 users liked this post by Redbul:
The following users liked this post:
tgaffner (06-30-24)