Greddy 3 piece pipping?
02-07-05, 05:35 PM
#1
Senior Member
Thread Starter
iTrader: (1)
Join Date: Jul 2003
Location: california,usa
Posts: 554
Likes: 0
Received 0 Likes
on
0 Posts
Greddy 3 piece pipping?
I bought the 3 piece greddy intercooler pipping and then i bought the greddy smic separate...but the pipes dont fit with the intercooler. the elbow and the pipe that connects from the intercooler and elbow are fine but the 3rd piece doesnt have the right curve to it? any1 know y....or what pipe its supose to have?
02-07-05, 05:57 PM
#2
What's an RX-7 ?
Join Date: Jul 2002
Location: MN
Posts: 921
Likes: 0
Received 0 Likes
on
0 Posts
When I bought my Greddy FMIC and piping they came with arrows on the pipes representing the flow of air, I think 3 out of 4 of the pipes the arrows were put on wrong... You'll have to look at pictures of people who have that kit or just try different ways...
02-07-05, 06:36 PM
#3
I speak Japanglish
The third pipe, S pipe is different for the greddy smic pipings. You need to have the pipe cut.
*I also had the problem with the length of the pipes that connect from the elbow to the ic. I had to cut about 1.5in to fit it as well.
*I also had the problem with the length of the pipes that connect from the elbow to the ic. I had to cut about 1.5in to fit it as well.
02-07-05, 06:46 PM
#4
Senior Member
Originally Posted by RuffRyder
I bought the 3 piece greddy intercooler pipping and then i bought the greddy smic separate...but the pipes dont fit with the intercooler. the elbow and the pipe that connects from the intercooler and elbow are fine but the 3rd piece doesnt have the right curve to it? any1 know y....or what pipe its supose to have?
02-07-05, 07:05 PM
#5
I speak Japanglish
Greddy smic and stock smic has different inlet shape. You can not have same 3 piece kit that will fit both greddy smic and stock smic. You need a "L" shaped pipe instead of the "s" pipe
02-07-05, 07:36 PM
#7
Speed Mach Go Go Go
iTrader: (2)
Join Date: Oct 2001
Location: My 350Z Roadster kicks my RX7's butt
Posts: 4,772
Likes: 0
Received 2 Likes
on
2 Posts
The 3rd "S" pipe is "not" for the Greddy SMIC, it's for the OEM SMIC "only". You shouldn't have bought it. The Greddy has a intake pipe on it and comes with a small macaroni shaped pipe to connect to your y-pipe/air pipe. It also comes with another pipe for the exhaust side to connect to the stock elbow but that side can be replaced with the 2-peice kit.
Trending Topics
02-07-05, 09:56 PM
#9
Senior Member
Thread Starter
iTrader: (1)
Join Date: Jul 2003
Location: california,usa
Posts: 554
Likes: 0
Received 0 Likes
on
0 Posts
k cool.....ya jason at rx7store.net threw me off it says works with both so i went and bought it, shoudl of researched it first..anyways no biggie my dad owns a cnc shop can easily cut the s pipe. thnx for info guys
