Got my engine torn down
02-03-03, 06:27 PM
#26
Full Member
Join Date: Feb 2001
Location: woodstock,Ga
Posts: 172
Likes: 0
Received 0 Likes
on
0 Posts
If I could give you some advice on sending your injectors out to get cleaned. Try to get the injectors in the engine and the engine in the car on the same day or two. This is so they go from cleaning to getting gas through them as soon as possible.
I sent mine to Marren Motorsports and had them for about a week and a half before I turned the key and it wouldn't start. After talking to Dave at KDRotary, he had a similiar situation. The residue from the cleaning solution hardens, causing them to stick. I had to send them to RC for re-cleaning. Installed them and it crunk right up. Cost about 400 dollars.
I sent mine to Marren Motorsports and had them for about a week and a half before I turned the key and it wouldn't start. After talking to Dave at KDRotary, he had a similiar situation. The residue from the cleaning solution hardens, causing them to stick. I had to send them to RC for re-cleaning. Installed them and it crunk right up. Cost about 400 dollars.
02-03-03, 08:26 PM
#27
all i have to say is goodluck paw! and hopefully everything turns out GREAT! for me it's just a biaaatch even thinkin and planning out my re-build! 
(sometimes i catch myself crying at night) but yea best of luck! and keep us posted so that i can learn from your mistakes ;P jp but yea keep us posted ..
(sometimes i catch myself crying at night) but yea best of luck! and keep us posted so that i can learn from your mistakes ;P jp but yea keep us posted ..
02-03-03, 08:27 PM
#28
all i have to say is goodluck paw! and hopefully everything turns out GREAT! for me it's just a biaaatch even thinkin and planning out my re-build! (sometimes i catch myself crying at night) and hopefully i can get started on mine quick,but yea best of luck! and keep us posted so that i can learn from your mistakes ;P jp but yea keep us posted ..
(sometimes i catch myself crying at night) and hopefully i can get started on mine quick,but yea best of luck! and keep us posted so that i can learn from your mistakes ;P jp but yea keep us posted ..
02-03-03, 10:41 PM
#29
Originally posted by paw140
rotorbrain:
Thanks for the offer... how much do you want for the housings? And what is the 'skalliwag coating'? I'm not familiar with that.
I really think I'm going to go with a reman, though. I'll call Ray Crowe tomorrow and see what the deal is, and talk to my local dealer.
rotorbrain:
Thanks for the offer... how much do you want for the housings? And what is the 'skalliwag coating'? I'm not familiar with that.
I really think I'm going to go with a reman, though. I'll call Ray Crowe tomorrow and see what the deal is, and talk to my local dealer.
https://www.rx7club.com/forum/showth...hreadid=111142
Thread
Thread Starter
Forum
Replies
Last Post
trickster
2nd Generation Specific (1986-1992)
25
07-01-23 04:40 PM
KAL797
Test Area 51
0
08-11-15 03:47 PM
