which fuse to pull for "hold" light
10-14-01, 12:06 AM
#1
Resident Retard
Thread Starter
Join Date: Apr 2001
Location: Cockaigne
Posts: 1,918
Likes: 0
Received 0 Likes
on
0 Posts
which fuse to pull for "hold" light
anyone know how I can stop the hold light from flashing. I just got a power fc. I think someone on here had pulled a fuse. Anyone know which one?
10-14-01, 08:37 AM
#2
Senior Member
Join Date: Mar 2001
Location: Kannappolis, NC
Posts: 260
Likes: 0
Received 0 Likes
on
0 Posts
Looking at the wiring diagram, the 15 amp meter fuse would be the one to pull. I wouldn't suggest pulling it though - how about a piece of tape or removing the bulb for it?
10-14-01, 01:04 PM
#3
Resident Retard
Thread Starter
Join Date: Apr 2001
Location: Cockaigne
Posts: 1,918
Likes: 0
Received 0 Likes
on
0 Posts
glad you in particular replied. I was curious to know what kind of dyno numbers you are making. Mine seem to be way down from what the 5-speeds are making with similar mods. I have had the compression and boost checked and they are ok. Driveline losses I guess. Taking the bulb out seems prudent, unless it's hard to get to. Tape is out-too cheesy. Maybe I could cut the wire going to the light? Could splice it later if I needed to. BTW which page in the service manual? Thanks.
10-14-01, 02:12 PM
#4
Senior Member
Join Date: Mar 2001
Location: Kannappolis, NC
Posts: 260
Likes: 0
Received 0 Likes
on
0 Posts
I hope to have my car on a dyno this month or next - I'd like to know what I'm making too (I know its a lot more than before having the engine ported and Haltech'd). I'll never put down an auto FD but unfortunately, mod-for-mod, the auto cars will get less power to the wheels than manual tranny cars.
Wiring diagram page Z-48 (50 of the .pdf file).
Wiring diagram page Z-48 (50 of the .pdf file).
05-04-21, 02:35 PM
#6
RX-7 Bad Ass
iTrader: (55)
WOW that thread is literally old enough to vote 
Make sure the auto ECU is gone. if so and that light is still there just pull that bulb from the cluster.
Dale
Make sure the auto ECU is gone. if so and that light is still there just pull that bulb from the cluster.
Dale
The following users liked this post:
SavageFD (05-05-21)
05-05-21, 03:29 AM
#7
Haha yeah idk I have to pass inspection for the first time and Germany is pretty strict. So once I put my bulb back in for my airbag light the hold light started flashing as well. I fixed the HOLD light issue now onto the airbag flashing. Hope you are doing well back there in FL I miss it!
Thread
Thread Starter
Forum
Replies
Last Post
Boriquaguerrero
2nd Generation Specific (1986-1992)
20
04-22-19 01:15 PM