sup i got a 93 rx7 and my mods are pullies, intake,downpipe,highflowcat, full exhaust,hks twin power ignition,powerfc,apex superground kit,with stock turbos and intercooler... "what fuel injectors and fuel pump and fuel regulator should i get for those mods"....... and another thing im going to get a stage 3 race ported engine and a single turbo putting me around 650hp in the near future should i get diffrent fuel upgrade for those mods if i do what would u recomend????

 

RX-7 store, buy the whole fuel system kit.I think its like 1,000.

 

For your mods now you wont need any fuel mods. But for a single you will definetly need a new fuel kit, like the one from RX7 store. Hope you know 650hp is quite a lot for these engines/cars. You will have to extensive modifications to the entire car, not just throw a monster turbo on there and run 100lbs of boost.

 

i know what i need for the single turbo i got all the extra stuff in my garage but im just waiting for the engine rebuild with the 3mm seals and 3mm rotors so i can put everything on at 1 time........

 

check out http://www.kgparts.com/fuel_price.htm for some nice fuel kits at about the lowest prices. I just got Kit B with a modified OEM side feed rail for 850 primaries, from Keith. Recommended! I still have stock turbos and motor, but now I will have enough fuel for a single turbo in the future. You would want to get Kit C or Kit E. Then you'll also need a fuel pump from rx7.com or rx7store.net, I went with the Cosmo/NipponDenso/Supra pump from rx7.com and rewired the stock fp wiring, most people would recommend doing that.