engine swap advice
10-19-07, 01:25 AM
#1
Junior Member
Thread Starter
Join Date: Aug 2007
Location: Queensland, Australia
Posts: 8
Likes: 0
Received 0 Likes
on
0 Posts
engine swap advice
hey guys,
the last time i posted a thread on here i was asking if you could get a rolling shell of a 3rd gen rx7 and put a 12A (cant drive a 13b) in it. (this is due to the new driving laws with vehicle power restrictions)
BUT, i have a new idea on something i could try.
well, ive heard alot about putting a v8 in a 3rd gen.... but under the new laws i am not alowed to drive a v8....
so i was thinking..... would it be possible to buy a rolling shell 3rd gen and put a 4 cyl. engine in it instead??
if so, could i please have some information on how this could be done.... any advice will do..
thank you
the last time i posted a thread on here i was asking if you could get a rolling shell of a 3rd gen rx7 and put a 12A (cant drive a 13b) in it. (this is due to the new driving laws with vehicle power restrictions)
BUT, i have a new idea on something i could try.
well, ive heard alot about putting a v8 in a 3rd gen.... but under the new laws i am not alowed to drive a v8....
so i was thinking..... would it be possible to buy a rolling shell 3rd gen and put a 4 cyl. engine in it instead??
if so, could i please have some information on how this could be done.... any advice will do..
thank you
10-19-07, 01:47 AM
#2
Check the "other engine conversions" subforum...
https://www.rx7club.com/other-engine-conversions-non-v-8-118/
https://www.rx7club.com/other-engine-conversions-non-v-8-118/
Thread
Thread Starter
Forum
Replies
Last Post
trickster
2nd Generation Specific (1986-1992)
25
07-01-23 04:40 PM
fastrx7man
3rd Generation Specific (1993-2002)
33
09-02-15 09:42 PM
maikelc
3rd Generation Specific (1993-2002)
8
08-24-15 11:04 AM