3rd Generation Specific (1993-2002) 1993-2002 Discussion including performance modifications and Technical Support Sections.
Sponsored by:

Ebay re amemiya kit fitment?

Thread Tools
 
Search this Thread
 
Old 10-31-15 | 07:58 PM
  #1  
sypath's Avatar
Thread Starter
Meister
iTrader: (1)
 
Joined: Nov 2013
Posts: 66
Likes: 0
From: Sweden
Ebay re amemiya kit fitment?

Thinking about buying the re amemiya replica fenders made my "knightracer.com"

Does anyone have experience with these? how are the fender fitment?

(Mazda RX7 Amemiya re GT Wide Bodied Kit Complete Kit UK Stock | eBay)

Thanks
Old 11-01-15 | 02:22 AM
  #2  
imitek's Avatar
imitek
 
Joined: Jul 2007
Posts: 380
Likes: 5
From: portsmouth
Originally Posted by sypath
Thinking about buying the re amemiya replica fenders made my "knightracer.com"

Does anyone have experience with these? how are the fender fitment?

(Mazda RX7 Amemiya re GT Wide Bodied Kit Complete Kit UK Stock | eBay)

Thanks
Ive fitted a few of these the only problen you will have is the pannels are bent you may need to streach them straight and make additional berackets like for the front wing somtimes they will crack but a good repair will sort this out

Some of the fibreglass quality is very poor and bubbles grind back and repair normaly sideskirt

Bumpers always have crack in the wing section repair this from behind and strenghen

When you buy make sure you collect and take evrything out the box and inspect
people are bit gay when it come to replacement of dodgy parts like bent and twisted wings always on holiday or boss away

Over all id say you could fit the kit in 6 hours with repairs
Also the rear quarters i used rivnuts
I cant think of any other problems last 1 i fitted was 4 years ago
Old 11-01-15 | 05:48 AM
  #3  
240sxcess's Avatar
Junior Member
 
Joined: Apr 2013
Posts: 13
Likes: 0
From: Milwaukee wi
Originally Posted by imitek
Ive fitted a few of these the only problen you will have is the pannels are bent you may need to streach them straight and make additional berackets like for the front wing somtimes they will crack but a good repair will sort this out

Some of the fibreglass quality is very poor and bubbles grind back and repair normaly sideskirt

Bumpers always have crack in the wing section repair this
When you buy make sure you collect and take evrything out the box and inspect
people are bit gay when it come to replacement of dodgy parts like bent and twisted wings always on holiday or boss away

Over all id say you could fit the kit in 6 hours with repairs
Also the rear quarters i used rivnuts
I cant think of any other problems last 1 i fitted was 4 years ago
What he said some normally don't fit spot on but you usually can get them pretty spot on with hard work and elbow grease




All times are GMT -5. The time now is 08:22 PM.