double throttle solenoid/ fuel regulator solenoid
#1
Rotary Enthusiast
![](https://www.rx7club.com/images/misc/15_year_icon.png)
Thread Starter
iTrader: (1)
Join Date: Feb 2004
Location: UK
Posts: 899
Likes: 0
Received 0 Likes
on
0 Posts
double throttle solenoid/ fuel regulator solenoid
Im installing saxymans upgraded solenoids and while im at it im removing as much of the silly stuff as possible from under manifold. Im just wanting to know if i remove the double throttle and fuel pressure solenoids (fuel pressure regulator is gonna be piped straight to the lower manifold and the doubble throttle plates all removed and welded),, will any of these solenoids put the car into limp mode using a standard ECU (just for reference ive removed all the emissions related solenoids and although they throw up codes the car still runs great,, the only thing to date that has ever put my car in limp mode is the oil metering pump),
So basically will double throttle solenoid or fuel pressure regulator solenoid put car in limp mode? (I do have apexi FC which is going in car when all this work is done and goes for a tune)
So basically will double throttle solenoid or fuel pressure regulator solenoid put car in limp mode? (I do have apexi FC which is going in car when all this work is done and goes for a tune)
#2
Eye In The Sky
![](/images/misc/20_year_icon.png)
iTrader: (2)
Join Date: Feb 2001
Location: In A Disfunctional World
Posts: 7,902
Likes: 0
Received 119 Likes
on
69 Posts
Test it out yourself by removong them and checking for an error code.
Or just replace them with a resistor or the same resistance.
Do not make sometime more difficult than it is.
FOTU!
Or just replace them with a resistor or the same resistance.
Do not make sometime more difficult than it is.
FOTU!
#3
Rotary Enthusiast
![](/images/misc/20_year_icon.png)
iTrader: (4)
Join Date: Sep 2003
Location: Yutan, Nebraska
Posts: 982
Likes: 0
Received 0 Likes
on
0 Posts
I just put 330 ohm 1/2 watt resistors in mine. I have no Check engine lights. I still have the DTC. As far as the fuel pressure, I just bypassed it to the manifold and left the solenoid there and plugged in.
Trev
Trev
Thread
Thread Starter
Forum
Replies
Last Post
trickster
2nd Generation Specific (1986-1992)
25
07-01-23 04:40 PM
Skeese
Adaptronic Engine Mgmt - AUS
65
03-28-17 03:30 PM
msilvia
3rd Generation Specific (1993-2002)
28
04-14-16 12:58 PM