disabled and looking to buy 3rd gen...
#102
Senior Member
Thread Starter
damn battery was dead. bought the (somewhat pricey) camera 2y ago & charged it like 2w ago.. heh. will try & get some shots after a bit. she needs a touch of TLC interior wise & I gotta figure out the door-handle thing ASAP, but seems tight otherwise & is straight as an arrow, not to mention fast, even with the tranny in limp-mode.. buddy said it's got his previous '09 Rustang beat & it was a manual GT with a few bolt-ons. Oh yeah, (for those who showed concern, previously in the thread), FD's are DEFINITELY easier for a wheeled gimp to get in & out of than Miata's!! (let's just hope she's as mechanically sound as the two piles of rx7.com receipts have me hoping )
#106
Senior Member
Thread Starter
Thanks man, I'll try not to!! Below are some crappy pics of my brand "new", dirty, stock looking FD. No interior shots since the damn handle's froze already & I'm too gimpy to feel like going through the passenger side again atm, lol. (hopefully a little lube does the trick) I definitely plan to polish/replace the front signals ASAP & am considering RB's front lip. Love the sound of the HKS/GReddy exhaust but wish it had a smaller tip. Oh, and never mind the bag of trash on my front step that the lovely trash guys drove right on past this morning. That was aalmost an Ok pic too.
#107
Who say's i need a Van
iTrader: (18)
Join Date: Feb 2009
Location: Whatsittoya
Posts: 609
Likes: 0
Received 0 Likes
on
0 Posts
soo clean (the condition i mean). Have you seen my exhaust...now thats big. Congrats again dude. I cant wait till you get the controls in there so you can feel the car.
#108
Senior Member
Thread Starter
Thanks! Yeah, the previous owner wasn't kidding when he said NO dings/dents & given the dirt I can't tell, but he said no scratches either.. (original paint to boot) Yep, seen your exhaust, hehe. My buddy's a great welder/works @ an exhaust shop. We're considering removing the tip & putting something a touch smaller in it's place, (as the exit's probably an inch or so smaller). Hate to hack up a quality system, but I doubt I'd manage to re-sell it anywho..
#110
Senior Member
Thread Starter
Thanks for the graphite lube tip.
#112
Senior Member
Thread Starter
#114
Nothing to see here.
Mason, this just popped up on the Mazdaspeed page on Facebook. Check out his control set-up:
http://www.michaeljohnsonracing.com/
http://www.michaeljohnsonracing.com/
#115
Senior Member
Thread Starter
Mason, this just popped up on the Mazdaspeed page on Facebook. Check out his control set-up:
http://www.michaeljohnsonracing.com/
http://www.michaeljohnsonracing.com/
Still haven't got my controls installed as my friend's had to work major overtime lately, though maaybe before the weekend & he's got Saturday off, so it's coming. Like a wetawd I did take it for a spin yesterday evening though, out a back road.. using a metal rod to access the pedals. (no insurance, registration & outta state plate, lol) Not something I'll do again, but glad I got to drive her a lil bit while I wait!! Interior's rattly/needs a bit of work & I've got what appears to be a minor coolant leak, plus the regular speedo issue, but otherwise seems as tight as it looks.
EDIT - oh yea.. if I could get somebody to build it, his throttle setup does look like something that could be adapted to a road car for both gas/brake, so that's definitely cool! (it's possible I don't have the strength to operate them by hand - would need a good setup to reduce force)
#116
Nothing to see here.
Nice! I just dropped the FC off at the tuner today and put her back on insurance just moments ago. I have to run to DMV tomorrow to get her registered.
https://fbcdn-sphotos-a.akamaihd.net..._2303122_n.jpg
https://fbcdn-sphotos-a.akamaihd.net..._2303122_n.jpg
#117
Senior Member
Thread Starter
Does anybody happen to know what a stock, automatic FD should get in the 1/4 mile? (I'm guessing about 14.8+, considering 5spd's) Found a hint that mine went to the track @ least once & asked the previous owner about it:
"it went a few times but not since the gears, injectors and some other misc. mods were done... best time was a 13 flat but the gears alone should bump it to the 12s."
That's without the harness adapter that'll have the tranny shifting up where it should be, first on my list of stuff to buy next month. (along with hood struts so I can check ma ****. hoods too long for me to reach the latch & get to the side to raise it high enough to prop, lol) It's not likely to see much track time but I hope to have the tranny's valvebody recalibrated too, which should make it a tad quicker as well as cut down on a little heat - always a plus.
#118
Nothing to see here.
Sweet & looks good man! I'm hoping to be registered next month but may have to wait until August.
Does anybody happen to know what a stock, automatic FD should get in the 1/4 mile? (I'm guessing about 14.8+, considering 5spd's) Found a hint that mine went to the track @ least once & asked the previous owner about it:
"it went a few times but not since the gears, injectors and some other misc. mods were done... best time was a 13 flat but the gears alone should bump it to the 12s."
That's without the harness adapter that'll have the tranny shifting up where it should be, first on my list of stuff to buy next month. (along with hood struts so I can check ma ****. hoods too long for me to reach the latch & get to the side to raise it high enough to prop, lol) It's not likely to see much track time but I hope to have the tranny's valvebody recalibrated too, which should make it a tad quicker as well as cut down on a little heat - always a plus.
Does anybody happen to know what a stock, automatic FD should get in the 1/4 mile? (I'm guessing about 14.8+, considering 5spd's) Found a hint that mine went to the track @ least once & asked the previous owner about it:
"it went a few times but not since the gears, injectors and some other misc. mods were done... best time was a 13 flat but the gears alone should bump it to the 12s."
That's without the harness adapter that'll have the tranny shifting up where it should be, first on my list of stuff to buy next month. (along with hood struts so I can check ma ****. hoods too long for me to reach the latch & get to the side to raise it high enough to prop, lol) It's not likely to see much track time but I hope to have the tranny's valvebody recalibrated too, which should make it a tad quicker as well as cut down on a little heat - always a plus.
#119
Senior Member
Thread Starter
No, my mechanic buddy seems intent to work on everybody's **** but mine, heh. If this was a straightforward install, with enough time & pain I could maybe get'm on enough myself that they'd really only need adjusted.. but that's not the case this time.
#121
Senior Member
Thread Starter
For sure. Probably a dumb question, but did they put a dummy oil cooler in the empty duct of FD's that only came with one, or might I have spied that the previous owner upgraded that system as well? I've been thinking maybe I'd stick an aftermarket tranny cooler down there & had to do a doubletake yesterday. I can't reallly get down low enough to be positive just yet, but..
#122
Hey Mason,
You are not mistaken the automatic comes with two coolers stock. One for the oil and one for the ATF. The ATF runs through both the radiator and a cooler so if you plan on updating the radiator you will need to have an additional aftermarket cooler installed as well.
I have heard anything from 14.1-14.5 quoted for a fully stock automatic. I ran mine at the track with absolutely no experience and managed a 14.202 @97.96 this was with a 17 year old car, only mod was a downpipe, and a half broken-in motor.
Details here: https://www.rx7club.com/rotary-drag-racing-167/fd-challenged-challenger-r-t-884210/
Here is another recent attempt, someone made but he only had a 1/8 time. https://www.rx7club.com/3rd-generation-specific-1993-2002-16/first-time-drag-strip-958770/
13 flat would be very impressive for a mildly modded Auto. I am a little skeptical about that time without more info, I assume he didn't show a slip? What are the mods? (I'm sorry if you already listed them somewhere.) What was the car tuned to?
For sure. Probably a dumb question, but did they put a dummy oil cooler in the empty duct of FD's that only came with one, or might I have spied that the previous owner upgraded that system as well? I've been thinking maybe I'd stick an aftermarket tranny cooler down there & had to do a doubletake yesterday. I can't reallly get down low enough to be positive just yet, but..
Details here: https://www.rx7club.com/rotary-drag-racing-167/fd-challenged-challenger-r-t-884210/
Here is another recent attempt, someone made but he only had a 1/8 time. https://www.rx7club.com/3rd-generation-specific-1993-2002-16/first-time-drag-strip-958770/
"it went a few times but not since the gears, injectors and some other misc. mods were done... best time was a 13 flat but the gears alone should bump it to the 12s."
That's without the harness adapter that'll have the tranny shifting up where it should be, first on my list of stuff to buy next month. (along with hood struts so I can check ma ****. hoods too long for me to reach the latch & get to the side to raise it high enough to prop, lol) It's not likely to see much track time but I hope to have the tranny's valvebody recalibrated too, which should make it a tad quicker as well as cut down on a little heat - always a plus.
That's without the harness adapter that'll have the tranny shifting up where it should be, first on my list of stuff to buy next month. (along with hood struts so I can check ma ****. hoods too long for me to reach the latch & get to the side to raise it high enough to prop, lol) It's not likely to see much track time but I hope to have the tranny's valvebody recalibrated too, which should make it a tad quicker as well as cut down on a little heat - always a plus.
#123
Senior Member
Thread Starter
EDIT - OR do FD's actually have an ATF cooler that's separate from the radiator & mounted where the 2nd oil cooler goes for manuals that come as such? If so that's pretty cool, because everything else I've owned literally had them integrated into the radiator itself, like I referenced originally..
As for mods, as per the above, obviously I'm not entirely sure.. what I've been told is the engine was rebuilt by Chris of Rotary Performance 10k ago with 3mm apex seals, has 3" HKS/GReddy from the (new, factory) turbo's back, Power FC/Commander, 850/1300cc injectors, high flow pump, GReddy Airnx intake, 4.3 out back, upgraded torque converter bolted to a Mazda reman ATX with 13k on it & has been tuned for 12psi street/15 track. Oh, and a pulley kit. The thing literally came with 10y worth of receipts from rx7.com, who built the engine, supplied all parts & did all labor on it.. yearly. I've seen no slips. I just questioned the stack of business cards I found for a particular track. The previous owner's not really given me reason to doubt him though.
#125
This:
There is the standard radiator that is integrated to run ATF through it and a secondary ATF cooler that is installed in the duct on the turbo side of the car (passenger side for LHD). The one on the Battery side is the engine oil cooler. It is essentially the same and some people actually still use the ATF cooler as a secondary oil cooler when they do the 5 speed swap.
850/1300cc injectors is enough to run up over 400 hp, Although I doubt he was near that if he only ran it up to 15 psi. With that mod list I could see running 13 if you could keep traction. I believe it could be done, but I like seeing the actual numbers to get a feel of how it performed. I'd love to see what his 60 ft was. Post some slips when you get out to the track.
Also, here is a good thread that you might enjoy reading if you haven't found it yet https://www.rx7club.com/3rd-generation-specific-1993-2002-16/automatic-fd-guys-774433/
Looks like you've got a healthy car there, have fun
EDIT - OR do FD's actually have an ATF cooler that's separate from the radiator & mounted where the 2nd oil cooler goes for manuals that come as such? If so that's pretty cool, because everything else I've owned literally had them integrated into the radiator itself, like I referenced originally..
850/1300cc injectors is enough to run up over 400 hp, Although I doubt he was near that if he only ran it up to 15 psi. With that mod list I could see running 13 if you could keep traction. I believe it could be done, but I like seeing the actual numbers to get a feel of how it performed. I'd love to see what his 60 ft was. Post some slips when you get out to the track.
Also, here is a good thread that you might enjoy reading if you haven't found it yet https://www.rx7club.com/3rd-generation-specific-1993-2002-16/automatic-fd-guys-774433/
Looks like you've got a healthy car there, have fun