3rd Generation Specific (1993-2002) 1993-2002 Discussion including performance modifications and Technical Support Sections.
Sponsored by:

Did the US only get 2 seater RX7's? sorry bit of a noob question

Thread Tools
 
Search this Thread
 
Old 02-05-12 | 05:54 AM
  #1  
jet81j's Avatar
Thread Starter
Junior Member
 
Joined: Sep 2008
Posts: 25
Likes: 0
From: central coast nsw
Did the US only get 2 seater RX7's? sorry bit of a noob question

hi read a few builds from the US and i saw that a couple people said they have rare rear seats?? which got me confused as i'm in Aus.
reason why was i'd love to get rid of my rear seats for rear bins if thats what the US came with
Old 02-05-12 | 07:40 AM
  #2  
dgeesaman's Avatar
Moderator
iTrader: (7)
 
Joined: May 2002
Posts: 12,311
Likes: 22
From: Hershey PA
Yes, USDM market has only rear bins. The seats you might see in back have been imported.
Old 02-05-12 | 09:53 AM
  #3  
RXeckless's Avatar
Rotorless
iTrader: (11)
 
Joined: Jun 2010
Posts: 1,328
Likes: 4
From: Delhi, Ontario
ON

They may look cool to some folks, but take it from a owner(92 JDM) I'd rather have the bins. If you every want to relocated.... say your battery, the trunk is now your only option.
Originally Posted by RXeckless
I weight 185 lb. and could never fit in the back seat without removing the fronts! and even then there so deep 15 minutes sitting in them would cut off all circulation to the lower half of my body. I call my back seats my water bottle holder because thats all there good for, but it does give that area a nice finished look.



more if interested:
http://www.fd3s.net/rear_seats.html
Old 02-05-12 | 11:06 AM
  #4  
BryanDowns's Avatar
.
iTrader: (2)
 
Joined: Jul 2003
Posts: 1,175
Likes: 18
From: Louisville
The grass is always greener on the other side of the fence

I had bins and MUCH prefer the seats. The bins are a big hard plasticy thing, and are SUPER space inefficient compared to the room they take up. I find the rear seats to be a better place to store "stuff" than the bins ever were. Of course, you cant store your battery in them, but backpacks, coolers, jackets, etc etc sit back there much better. It doesn't hurt that someone can also sit back there if absolutely required. (say their car breaks down and they need picked up? )

If you guys wanting bins saw inside of the storage "bin" you'd understand what I mean. For some reason the bucket that stuff sits in is tiny compared to the available area underneath the bin.
Old 02-05-12 | 05:08 PM
  #5  
jet81j's Avatar
Thread Starter
Junior Member
 
Joined: Sep 2008
Posts: 25
Likes: 0
From: central coast nsw
Yeah i just like the look of the bins. If you can ever find the whole set it goes for about $300-400 over here in Aus. Would be about the same in delivery though I guess to try swap someone from the US to Aus and I would t know how to work out a swap mite be risky.
Old 02-05-12 | 05:32 PM
  #6  
Ryan95's Avatar
Senior Member
iTrader: (10)
 
Joined: Feb 2001
Posts: 259
Likes: 0
From: CO
The bins also weigh a bit more than the rear seats. When I swapped mine out I was surprised.
Old 02-05-12 | 06:25 PM
  #7  
moosejaw's Avatar
Rotary Freak
iTrader: (6)
 
Joined: Jun 2004
Posts: 1,641
Likes: 8
From: Miami
UK version also only came as a 2 seater and i dont mean grey market ones.
Old 02-05-12 | 06:36 PM
  #8  
RotaryEvolution's Avatar
Sharp Claws
iTrader: (30)
 
Joined: Oct 2003
Posts: 5,107
Likes: 47
From: Central Florida
pretty sure it was an option but no one bought into it nor do i think the salesmen tried to sell it with the option.

the 2nd gens had the option as well but i would guess that between 1-3% of all FCs purchased were bought with that option. that is why they are rare even for the FC but the FCs had about literally 50 times more cars produced in that 5 year span. so if an FD was bought with them then it is quite rare. auto FDs for example probably make up about 5-8% of the FD population for example and would be more than twice as common.

this is just based on my personal experience and guesstimates so don't take it literally, i have not seen an FD with rear seats yet.

my FC TII was special ordered with manual steering, virtually every other i have seen it was changed by the owner to manual.

Last edited by RotaryEvolution; 02-05-12 at 06:40 PM.
Old 02-05-12 | 07:34 PM
  #9  
wstrohm's Avatar
Recovering Miataholic
 
Joined: Mar 2002
Posts: 1,546
Likes: 43
From: Fountain Valley, CA
Is it feasible to remove the bins and carpet the previously hidden area?
Old 02-05-12 | 07:52 PM
  #10  
RotaryEvolution's Avatar
Sharp Claws
iTrader: (30)
 
Joined: Oct 2003
Posts: 5,107
Likes: 47
From: Central Florida
Originally Posted by wstrohm
Is it feasible to remove the bins and carpet the previously hidden area?
one of my customers did, looks a bit more roomy without the bins and backrest area. he did it mainly because he's like 6'4" and needed the extra space.
Old 02-05-12 | 08:55 PM
  #11  
Ryan95's Avatar
Senior Member
iTrader: (10)
 
Joined: Feb 2001
Posts: 259
Likes: 0
From: CO
Originally Posted by Karack
pretty sure it was an option but no one bought into it nor do i think the salesmen tried to sell it with the option.

the 2nd gens had the option as well but i would guess that between 1-3% of all FCs purchased were bought with that option. that is why they are rare even for the FC but the FCs had about literally 50 times more cars produced in that 5 year span. so if an FD was bought with them then it is quite rare. auto FDs for example probably make up about 5-8% of the FD population for example and would be more than twice as common.

this is just based on my personal experience and guesstimates so don't take it literally, i have not seen an FD with rear seats yet.

my FC TII was special ordered with manual steering, virtually every other i have seen it was changed by the owner to manual.
They were never an option in the US. The cars were never certified as anything but a 2 seat car, the jspec seatbelts probably wouldn't have passed as they don't have a real lap belt.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
trickster
2nd Generation Specific (1986-1992)
25
07-01-23 05:40 PM
Claudio RX-7
Haltech Forum
5
04-23-19 03:50 PM
smikels
Rtek Forum
4
05-12-16 01:34 AM
Professorpeanutrx7
New Member RX-7 Technical
5
08-15-15 02:38 PM




All times are GMT -5. The time now is 09:25 PM.