3rd Generation Specific (1993-2002) 1993-2002 Discussion including performance modifications and Technical Support Sections.
Sponsored by:

Cold start question ?...

Thread Tools
 
Search this Thread
 
Old 11-19-12 | 04:36 PM
  #1  
Denorx7's Avatar
Thread Starter
Full Member
 
Joined: Nov 2012
Posts: 113
Likes: 0
From: UK
Cold start question ?...

Hi I Just want to say I have this problem for ages but I never bothered to fix it basically when I start the car from cold start normal and after 5 or 10 sec it die so I have to start the egine again then it's ok,but sometimes before it die I poke the throttle once or twice and it stays on no cut so any idea what that coule be please?
Cheers
Old 11-19-12 | 06:10 PM
  #2  
DaleClark's Avatar
RX-7 Bad Ass
iTrader: (55)
 
Joined: Jan 2002
Posts: 15,423
Likes: 2,477
From: Pensacola, FL
Stock ECU or not?

The PowerFC's stock map is cranky on cold starts, I changed the settings and made it much better. Stock ECU, could be something with the water temp sensor.

Dale
Old 11-19-12 | 07:30 PM
  #3  
SA3R's Avatar
10-8-10-8

 
Joined: Jan 2012
Posts: 845
Likes: 10
From: Australia
Dale,
I kinda get this with my stock ECU too.

Cold start: 1000rpm steady....(10 seconds in) *cough splutter* engine misfires, RPM dips and roughens to around 500rpm* I put my foot in, bring it smoothly up to 2000rpm, engine happy to fast idle again as long as I keep it on 1000rpm with my foot til water temp reaches just warm. Then comes off fast idle by itself as per usual.

Only does this during cold days. on cold start during warm summery days, I do not get this behaviour?
Old 11-20-12 | 02:37 AM
  #4  
Denorx7's Avatar
Thread Starter
Full Member
 
Joined: Nov 2012
Posts: 113
Likes: 0
From: UK
Hks pro ecu and start fine it die after 10 sec if I poke the throttle stay I mean I don't hold my foot just a lil kick and the engine stay on no problem I didn't try in summer yet .
Old 11-20-12 | 09:10 AM
  #5  
CloudPump's Avatar
Rotary Enthusiast
iTrader: (2)
 
Joined: Oct 2010
Posts: 865
Likes: 2
From: Toronto
So... you have a hot start problem:
https://www.rx7club.com/3rd-generati...oblem-1017974/

And a cold start problem?

Do that compression test you were talking about in the other thread.

-Geoff
Old 11-20-12 | 01:36 PM
  #6  
Denorx7's Avatar
Thread Starter
Full Member
 
Joined: Nov 2012
Posts: 113
Likes: 0
From: UK
Hot start yes but cold one not really big deal I just explained how it happen when I start from cold I just want to know what's cause it .
Old 11-20-12 | 06:39 PM
  #7  
thewird's Avatar
Lives on the Forum
iTrader: (8)
 
Joined: Oct 2006
Posts: 6,597
Likes: 11
From: Toronto, Canada
Its just lack of fuel on cold start. No way to fix it with your current ECU but you can check fuel related things like fuel pump, fuel filter, etc.

thewird
Old 11-21-12 | 02:39 AM
  #8  
Denorx7's Avatar
Thread Starter
Full Member
 
Joined: Nov 2012
Posts: 113
Likes: 0
From: UK
That's make sence now thanks mate,does wastegate burst hose cause a bit of not stable idle and other issues ?
Old 11-21-12 | 09:24 AM
  #9  
CloudPump's Avatar
Rotary Enthusiast
iTrader: (2)
 
Joined: Oct 2010
Posts: 865
Likes: 2
From: Toronto
Originally Posted by Denorx7
That's make sence now thanks mate,does wastegate burst hose cause a bit of not stable idle and other issues ?
No. Your wastegate does not function at idle.

Get a compression test.

-Geoff
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Kyo
2nd Generation Specific (1986-1992)
6
04-13-19 10:24 AM
stickmantijuana
Microtech
30
04-23-16 07:37 PM
diabolical1
2nd Generation Specific (1986-1992)
30
01-30-16 06:50 AM




All times are GMT -5. The time now is 03:18 AM.