IMHO metric gauges aren't that big of a deal. Actually, I prefer them - heck, everything else in the car is metric :). It takes maybe a day to get used to the reading from a metric gauge - once you learn what you need to know, it's no biggie.
On Jim's idea of having an all-in-one gauge: http://www.defi-shop.com/product/dp/dp_top.html Defi has the Defi-Link Display, which uses an OLED display. It can display water and oil temp, EGT, and fuel and oil pressure. Cool thing is you can set warning points for any input, so if something goes "in the red" it will alert you to that reading. Pretty slick. Dale |
Now, if they could just put it in a round 60mm format and get rid of the stupid screensavers... :)
|
Originally Posted by 7-sins
The Defis are still at the top of my list eventhough this is cool for autometer... I just wish Defi came out with the US system instead of metric.
|
I agree with you on the d-gauges rotormotor, but of course there are some who harp on the fact that the needle isn't exactly right (it goes through the pivot point and illuminates the other side) and the boost gauge reads in 2.5 psi increments. Eh...they are the best match by far.
The thing is that the resolution on the defi desplay (based on the demo) isn't that great and it's monochromatic. Cost is the real limiting factor now. This is an interesting read. Look at the last page. http://www.ewh.ieee.org/soc/cpmt/pre.../cpmt0401a.pdf I'm trying to find more information about that product. Seems promising. Just a matter of getting something to output the display you want to it. The end of mechanical movement. EDIT: $625. Maybe when I get a bonus. :D That's for the eval kit. $42 it looks like for the display alone. They come in a serial and parallel version. Anyone feeling ambitious? Second edit: Alas...misleading advertising. Only 4 bit greyscale. Damn...but it's out there somewhere. |
Wierd Heater problem
It seems when I turn the heater on full blast , my eyes start to hurt meaning there are some fumes coming in along with the hot air, also even when I have the switch to off it still blows on level 1.
anyone know what might cause this? |
Originally Posted by Nick13B
It seems when I turn the heater on full blast , my eyes start to hurt meaning there are some fumes coming in along with the hot air, also even when I have the switch to off it still blows on level 1.
anyone know what might cause this? |
pretty slick website
|
Originally Posted by SurgeMonster
then these new autometer gauges will work great, they have a built in filtration system that will pull all the fumes out that your ac produces
|
Here is some pricing on these gauges
PART# DESCRIPTION PRICE RETAIL AM6400 Nexus Sensor Module & Remote $199.00 $265.35 AM6445 Nexus Pyrometer, 2000 F $229.00 $305.35 AM6453 Nexus Oil Press, 100 psi $249.00 $332.00 AM6455 Nexus Water Temp, 100-260 F $199.00 $265.35 AM6456 Nexus Oil Temp, 140-300 F $199.00 $265.35 AM6459 Nexus Boost/Vac, 30/30 $249.00 $332.00 AM6463 Nexus Fuel Press, 100 psi $249.00 $332.00 AM6474 Nexus Nitrous Press, 1600 psi $249.00 $332.00 Those prices should be close to the street price. Jason |
Ouch,
Those prices seem steep. Still pretty decent looking gauge as far as operations go; boring looking gauge face/font though. I do like the new BF's in amber though! Also, are these 52mm, 60mm or 2-5/8"? Regards, Frank |
Hmm...pretty ridiculous for Autometer to charge more than the Defi Link series they are blatantly copying.
Also, to correct some misinformation -- both the Defi Link and the Defi D-gauges are available in SI units. The BF Link gauges are not. Personally, I don't care that my Defi Link gauges have different backlighting -- they look simply first class. In fact, I wish the OEM backlighting was green with red needles. |
they are nice for for that price id rather just buy a powerFC
|
Be-jesus that expensive!!
|
Originally Posted by rynberg
I wish the OEM backlighting was green with red needles.
|
All times are GMT -5. The time now is 05:50 PM. |
© 2024 MH Sub I, LLC dba Internet Brands