13Joe

Hi, i read somewhere in the forum that the chacoal cannister can be eliminated. Can someone here guide me through this? I've tried searching, but to no avail. Can the entire system (ie. catch tank, fuel purge control solenoid, all related lines) be removed, and the nipple at the UIM plugged up? Im currently running simplified seq.

Thanks y'all.

fd3s7007

does julian know you;re here doing things you're not supposed to??

badddrx7

iTrader: (7)

I removed mine 4 yrs ago - no problems.

tom

fd3s7007

hi tom. any description on how the procedure was done? appreciate the help. TIA

Dave

joe13

Hahahaha... gotta cool it in the Malaysian forum... she's checking it quite often nowadays, and doesnt really get why im so **** in tryin to remove *as much as possible*...

Anybody can lend a hand here... as to how we can do this?

13Joe

anyone can lend an insight here?

Gamezilla

You, um, just take it out. Its got lines that run to the tank that you're gonna have to yank out. Im not sure why you'd want to remove it though. You'll end up with that gas smell everytime you get on it.

13Joe

erm... i just yank it out? how about the solenoid (purge control) valve, and all the lines running to the UIM? can i delete those too and plug up the nipple at the UIM? I know one line from chacoal cannister goes to catch tank, then solenoid valve, then UIM. Where does the other line goes to?

Thanks again.

Gadd

Take a look at page F-129 of the factory manual, it'll show you the vapor recovery system. But why do you want to remove it?? If you do you'll need to rigg something to SAFELY vent the gas vapors.