Cant Figure It Out... Need Help
07-03-06, 12:52 PM
#1
Junior Member
Thread Starter
Join Date: Nov 2005
Location: Mechanicsburg PA
Posts: 20
Likes: 0
Received 0 Likes
on
0 Posts
Cant Figure It Out... Need Help
My car has single with microtech and profec-b (gen1). I was doing a high boost run at 20psi and all of a sudden my car cut out. I though I blew an IC pipe. I pull over IC pipes are fine.
The car runs fine in vaccum. Once it sees any boost it cuts out. The microtech has no error codes and the IC pipe are fine. I need help ASAP
BTW changed the plugs and checked the MAP sensor it seems fine along with the hose...
Thanks for any help im running out of ideas
The car runs fine in vaccum. Once it sees any boost it cuts out. The microtech has no error codes and the IC pipe are fine. I need help ASAP
BTW changed the plugs and checked the MAP sensor it seems fine along with the hose...
Thanks for any help im running out of ideas
Thread
Thread Starter
Forum
Replies
Last Post
eplusz
General Rotary Tech Support
15
10-07-15 04:04 PM