Can I use an FD automatic brake pedal assembly in a transmission conversion?
01-10-13 | 07:10 PM
#1
Thread Starter
Junior Member
Joined: Mar 2006
Posts: 39
Likes: 0
From: Key West, FL
Can I use an FD automatic brake pedal assembly in a transmission conversion?
I have a very specific question regarding an automatic to manual transmission conversion.
Can I use my automatic FD brake pedal assembly in the conversion and if so, what exactly do I need to do to modify it? (IE: cut pedal off, etc)
I've read every post on this topic and many posts are conflicting.
Thank you all for your help!
Can I use my automatic FD brake pedal assembly in the conversion and if so, what exactly do I need to do to modify it? (IE: cut pedal off, etc)
I've read every post on this topic and many posts are conflicting.
Thank you all for your help!
01-10-13 | 08:12 PM
#2
yes you can, i have done 2 conversions i just cut the pedals. just cut a lil off the sides. if i remember (did this a while ago) you may have to bend the pedal a bit to the side
