Bose center channel removal question
#1
Senior Member
Thread Starter
Join Date: Apr 2001
Location: Charlotte, NC
Posts: 306
Likes: 0
Received 0 Likes
on
0 Posts
Bose center channel removal question
I have blown my center cannel and it is rattling pretty good so I decided to remove it. I got the cover off and the screws but I can't seem to disconnect the harness. I ended up cutting the wires close to the speaker just so that I didn't have to listen to it anymore but I would still like to be able to remove the harness so that I can replace it one of these days. I saw where it seems that it would disconnect from but no matter how much I pull or pry I can't get it off. I saw a little lower on the harness that there are two eared clips that allow a flap to come lose but that doesn't seem to help matters. Any help that can be given to me would be appreciated.
P.S.--> If anybody has a functioning center channel I would be interested in purchasing it so let me know.
P.S.--> If anybody has a functioning center channel I would be interested in purchasing it so let me know.
Last edited by SpeedracerRX7; 06-18-02 at 12:07 PM.
Thread
Thread Starter
Forum
Replies
Last Post
David Hayes
3rd Generation Specific (1993-2002)
13
09-05-22 12:45 PM
msilvia
3rd Generation Specific (1993-2002)
28
04-14-16 12:58 PM