Boosting Problem
10-29-05, 07:59 PM
#1
Junior Member
Thread Starter
Join Date: Oct 2005
Location: San Diego
Posts: 35
Likes: 0
Received 0 Likes
on
0 Posts
Boosting Problem
hey all, ok i am not sure what is going on but my FD is not boosting at all. there is vacuum and then it will go up to 0 PSI. i really dont what to start looking at first. i checked all my fittings and they all appear to be fine. i have only had it for 3 months and i baby the thing. the only mod so far is the greddy TI exhaust. any ideas...
10-29-05, 08:13 PM
#2
Racecar - Formula 2000
By "fittings" I assume you meant all of the large hoses from the turbos to the IC to the intake? These tend to split, and the splits often can't be seen until they are removed for inspection. Therefore, I'd guess that you severely split one of these, or it came totally loose. That would sure fit your symptoms.
10-29-05, 11:33 PM
#4
Rotary Freak
iTrader: (1)
Join Date: Oct 2003
Location: Hampton, Va
Posts: 2,506
Likes: 0
Received 0 Likes
on
0 Posts
This might help:
http://www.autosportracetech.com/RX-...leshooting.htm
http://www.autosportracetech.com/RX-...leshooting.htm
Thread
Thread Starter
Forum
Replies
Last Post
rgordon1979
3rd Generation Specific (1993-2002)
40
03-15-22 12:04 PM
tiger18
3rd Generation Specific (1993-2002)
9
09-03-15 08:27 PM