BLING...BLING!! Mazdaspeed '99 GTC front bumper is on! Check it....
Trending Topics
#9
Senior Member
Join Date: Feb 2001
Location: Spring Valley, NY
Posts: 273
Likes: 0
Received 0 Likes
on
0 Posts
Dammit.. you know yer making it hard for us to decide on which bumper..
Cwest or GTC.. GTC or CWest!!
otherwise.. **** is tight!!!
Also, how's the quality? what's the difference between the copy version?
Cwest or GTC.. GTC or CWest!!
otherwise.. **** is tight!!!
Also, how's the quality? what's the difference between the copy version?
#10
Senior Member
Join Date: Feb 2001
Location: Spring Valley, NY
Posts: 273
Likes: 0
Received 0 Likes
on
0 Posts
I'm sure it's for added air for the IC.. it's just a nice added feature..
hmm.. you can actually hide the license plate in there, then hit a button and it comes out!! hmmm??
hmm.. you can actually hide the license plate in there, then hit a button and it comes out!! hmmm??
Originally posted by Zoomspeed
SUPER PHATY PHAT PHAT!! Whats that slit in the middle of the front for?
SUPER PHATY PHAT PHAT!! Whats that slit in the middle of the front for?
#11
Living life 9 seconds at a time
Thread Starter
iTrader: (2)
Join Date: Feb 2001
Location: Abingdon, Md
Posts: 6,541
Likes: 0
Received 0 Likes
on
0 Posts
Thanks guys...
Alex, its a direct bolt on, since it was from Mazdaspeed. I had it painted, then installed it myself. Took a whole 15minutes!
And the slit is for "ram air effect" or it can be used as the lisence plate bracket. One came w/ the bumper, but Im not putting it on. I like the idea of more air...
Alex, its a direct bolt on, since it was from Mazdaspeed. I had it painted, then installed it myself. Took a whole 15minutes!
And the slit is for "ram air effect" or it can be used as the lisence plate bracket. One came w/ the bumper, but Im not putting it on. I like the idea of more air...
#14
Full Member
Join Date: Mar 2001
Location: Austin, TX
Posts: 141
Likes: 0
Received 0 Likes
on
0 Posts
Ernie,
Looks good. Does this work with the 99 underbelly pan or did you use the stock bellypan? Also what about the ducting for the oil coolers? Is it built into the fascia or did you modify yours? Are those ducts in front of the tires for the oil cooler air exhaust?
Thanks,
Mark
Looks good. Does this work with the 99 underbelly pan or did you use the stock bellypan? Also what about the ducting for the oil coolers? Is it built into the fascia or did you modify yours? Are those ducts in front of the tires for the oil cooler air exhaust?
Thanks,
Mark
#18
Banned. I got OWNED!!!
no offense please Ernie......but......am i the only one that finds that bumper a bit ugly??
please no offense. you have one ***** out FD......just the the bumper is very very ugly IMO.
just my .02.
please no offense. you have one ***** out FD......just the the bumper is very very ugly IMO.
just my .02.
#20
From the front wheels forward, it looks bad a$$! But once the rest of the car comes into the picture, it does look kinda out of place. Get some sideskirts and rear and you got one nice car!
And can you lower your FMIC a little? It seems that the upper part of the IC is being blocked from the bumper. And plus, it'll look better if you can see the WHOLE FMIC! Just my 0.02
And can you lower your FMIC a little? It seems that the upper part of the IC is being blocked from the bumper. And plus, it'll look better if you can see the WHOLE FMIC! Just my 0.02
#22
sold the FD...kept the FB
Looks pretty good.
On that first picture it looks like your headlight doors are a bit high. Look at the pasenger side one. Might just be the photo. But if not, loosen up the four screws and line those babies up with the bumper.
My $ 0.02 , As long as your happy.... thats all that matters.
On that first picture it looks like your headlight doors are a bit high. Look at the pasenger side one. Might just be the photo. But if not, loosen up the four screws and line those babies up with the bumper.
My $ 0.02 , As long as your happy.... thats all that matters.
#23
Living life 9 seconds at a time
Thread Starter
iTrader: (2)
Join Date: Feb 2001
Location: Abingdon, Md
Posts: 6,541
Likes: 0
Received 0 Likes
on
0 Posts
As for the Apex FMIC, it does sit a bit high, but in order for me to drop it, I'd have to cut and reweld the end tanks. I don't feel like doing all that, especially if I ever sell it. It still sits pretty well in the opening.
#25
Erniet,
Who did you get the GTC bumper from? how much too? If you want, you can email me back at homiedru@hotmail.com.
Who did you get the GTC bumper from? how much too? If you want, you can email me back at homiedru@hotmail.com.